VTX350H Three-Channel Guitar Amplifier with Advanced DSP
15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 |
10.HIGH: Use this control to adjust the high frequency level of Channel 3.
11.LEVEL: Use this control to adjust the output level of Channel 3.
12.MID: Use this control to adjust the midrange frequency level of Channel 3.
13.GAIN: Use this control to adjust the amount of distortion produced by Channel 3.
14.LOW: Use this control to adjust the low frequency level of Channel 3.
15.2 (CH 2 SELECT): This switch, when depressed, selects Channel 2 as the active channel. The adjacent yellow LED illuminates when Channel 2 is active. Channel 2 features a medium gain FlexWave circuit for moderate distortion and “crunch.”
16.HIGH: Use this control to adjust the high frequency level of Channel 2.
17.LEVEL: Use this control to adjust the output level of Channel 2.
18.MID: Use this control to adjust the midrange frequency level of Channel 2.
19.GAIN: Use this control to adjust the amount of distortion produced by Channel 2.
20.LOW: Use this control to adjust the low frequency level of Channel 2.
21.1 (CH 1 SELECT): This switch, when depressed, selects Channel 1 as the active channel. The adjacent green LED illuminates when Channel 1 is active. Channel 1 features a low gain FlexWave circuit for clean sounds or sounds with mild distortion.
22.HIGH: Use this control to adjust the high frequency level of Channel 1.
23.LEVEL: Use this control to adjust the output level of Channel 1.
24.MID: Use this control to adjust the midrange frequency level of Channel 1.
25.GAIN: Use this control to adjust the amount of distortion produced by Channel 1.
26.LOW: Use this control to adjust the low frequency level of Channel 1.
27.(INPUT): Use this jack to connect your guitar to the amplifier by means of a shielded instru- ment cable.
5
