Connectivity

Sound Blaster

Audigy 2 Platinum

eX Card

Audio Outputs
SB1394/FireWire

The 6-pin SB1394/FireWire connector/port has a 3-watt maximum power output.

Connect only one high power usage device such as an IEEE 1394 hard disk or CD-RW drive to this port unless it is powered off the AC outlet.

❑2 x line-level analog outputs via stereo jacks on rear bracket: Front and Rear Line-Outs 1 and 2

❑Stereo headphone (32-ohm load) support on Line Out 1

❑1 x line-level three channel analog output via 4-pole 3.5 mm minijack on rear bracket: Front Center, Rear Center and Subwoofer channel

❑AD_LINK 2 connector on rear bracket for power supply to the External I/O Module.

Interfaces
❑AD_LINK 1 connector for linking to the External I/O Module❑Joystick/MIDI connector for connection to the audio card

General Specifications A-3