INSTALLATION

IMPORTANT

It is essential that the lower cupboard is constructed in the manner illustrated i.e.

having side, back, and roof panels so joined as to provide no apertures which could permit access to the oven unit when installed.

1. GENERAL

The appliance is designed for mounting at a safe level into an oven housing which must be secured to the backing wall.

2.VENTILATION

a.The oven housing unit cabinet dimensions must comply with fig. 4.

b.An air gap of 50mm minimum must be provided at the rear of any top or bottom cupboards or shelves (see fig. 1).

c.It is necessary that the cabinets are provided with unobstructed ventilation, i.e. from adjacent cabinetry. This can be done by either raising the base of the cabinets using the adjusting feet (or spacers) or alternatively by providing a slot in the cabinet plinth to the dimensions in fig. 1.

d.The air gap at rear allows the warmed air to pass out of the inner cabinet space. Where it is intended to fit cupboards above the oven unit to ceiling height, it is essential that the warmed air is exhausted through the front of the cabinet (see fig. 1).

e.If an oven unit is installed adjacent to a tall cabinet, steam escaping from the oven when the door is opened could condense on and maybe stain the adjacent surface. To prevent permanent staining, the adjacent surface should be made of a material that is heat resisting and easy to clean. Adjacent tall cabinets should not be deeper than the oven housing cabinet.

3.FINAL INSTALLATION

a.Using a spirit level, check that the housing cabinet is level from side to side and from front to back in its installed position.

b.Correct any unevenness by placing spacers under the bottom of the cabinet. Make sure that the cabinet rests firmly on the floor without rocking.

c.Before the oven is fitted, the cabinet must be firmly secured to the backing wall for stability.

d.The oven unit should now be lifted (this is a two person lift) into the cabinet and pushed fully home.

e.Finally, the oven is secured to the cabinet by means of the four Pozi Wash Head screws - two through each side trim.

f.Remove all packaging material from the grill and oven interior.

LIST OF LOOSE ITEMS

4 x Pozi Wash Head No. 6 x 15mm screws.

33

Page 33
Image 33
Creda Double Oven manual General, Ventilation, Final Installation, List of Loose Items

Double Oven specifications

The Creda Double Oven is a popular choice for both amateur and professional cooks, providing a versatile cooking experience that combines practicality with advanced technology. Renowned for its capacity and efficiency, this oven is designed to meet the demands of modern kitchens while delivering consistent performance.

One of the standout features of the Creda Double Oven is its dual cooking compartments. This configuration allows users to cook multiple dishes simultaneously at different temperatures, significantly reducing meal preparation time. The upper oven is typically designed for quicker cooking tasks, such as baking or broiling, while the lower oven offers a larger capacity ideal for roasting or baking large items.

Energy efficiency is another key characteristic of the Creda Double Oven. Equipped with modern insulation technologies, it minimizes heat loss, ensuring that energy consumption is kept to a minimum without compromising cooking performance. This not only helps in reducing utility bills but also makes it an environmentally friendly appliance.

In terms of technological advancements, the Creda Double Oven features fan-assisted cooking in both compartments. This technology promotes an even distribution of heat, ensuring consistent cooking results regardless of where the food is placed inside the oven. The fan system also helps to reduce cooking times, making meal preparation quicker and more efficient.

Cleaning the Creda Double Oven is effortless, thanks to its self-cleaning function. The interior surfaces are designed with easy-to-clean materials that resist staining and food buildup, making maintenance a breeze. Many models include a catalytic lining that helps break down grease and food residues during cooking, allowing for a hygienic cooking environment.

User-friendliness is central to the design of the Creda Double Oven. Most units come with intuitive controls and digital displays that offer precise temperature settings and cooking timers. This ensures that users can easily monitor their cooking progress without hassle.

Durability is another hallmark of the Creda brand. Constructed with high-quality materials, the double oven is engineered to withstand the rigors of everyday use. With a stylish finish, this appliance complements any kitchen aesthetic, whether modern or classic.

In summary, the Creda Double Oven combines versatility, energy efficiency, advanced cooking technology, and ease of use, making it an ideal choice for anyone looking to elevate their cooking experience. Whether you're baking, roasting, or preparing multi-course meals, this oven provides the features necessary for culinary success.