Care and Cleaning

Regular cleaning is recommended to keep white cookers in its best possible condition.

Turn OFF the main control unit and allow the cooker to cool before cleaning.

Before switching on again, ensure that all controls are in the OFF position.

'CREDACLEAN' OVEN LINERS AND HOW THEY WORK

The surfaces of the 'Credaclean' oven liners are treated on the mottled face with a special vitreous enamel which absorbs cooking soils. At temperatures of 220oC (425oF) or above, the special surface enables these soils to be slowly destroyed. The higher the temperature, the more effective it is. In most cases normal cooking operations at this temperature will permit this cleaning operation to proceed during cooking. However, if higher cooking temperatures are not used regularly, it may be necessary, in order to prevent heavy soiling, to run the oven without a meat pan, at

a higher temperature setting of 230oC (450oF) for a couple of hours. This may be necessary once a month or every two or three months depending on the type and amount of oven cooking.

OVEN SIDES

It should not normally be necessary to clean the 'Credaclean' panels. If the user feels it is desirable to do so, pull out the rod shelves, lift up and remove the side panels before washing them in warm soapy water, and rinsing in clear water.

Do not use enzyme/biological washing powder, harsh abrasives or oven chemical cleaners of any kind.

VITREOUS ENAMEL HOB SURROUND

Clean with a cloth wrung out in soapy water. Stubborn stains can be removed with a cream, paste or liquid cleaner, or by gently rubbing with liberally soaped, very fine steel wool pads. Check that the cleaning agent used is approved by the Vitreous Enamel Development Council.

Note: We do not recommend the use of decorative covers over the hot hotplates as these can hold condensation and cause corrosion. Accidental operation with a cover in place can cause intense heat. Never place saucepan lids on the hotplates, as this may cause corrosion.

SEALED HOTPLATES

The cleaning of sealed hotplates should be done when they are cold, using a soap filled scouring pad, following the grain of the hotplate. This will ensure that any stubborn, burnt on spillages are removed. Wipe over with a damp clean cloth, making sure that all the cleaner has been removed. Finally, turn on heater to warm for a few minutes, then smear with a little cooking oil to provide a protective coating, or

a restorative agent such as Collo-Electrol®. This is available from Creda Spares Department.

CONTROL PANEL AND SPLASHBACK

Wipe over the control panel and/or splashback with a damp cloth. Polish with a dry cloth. Do not use oven cleaners or aerosols, scouring pads or abrasive powder for cleaning the plastic knobs as damage will occur.

H050E specifications

The Creda H050E is a state-of-the-art electric heater that has gained popularity for its reliable performance and user-friendly features. Designed with advanced technology, it delivers efficient heating solutions for various indoor spaces, making it suitable for both residential and commercial environments.

One of the standout features of the Creda H050E is its compact and sleek design. This makes it easy to integrate into any room without occupying excessive space. Its aesthetically pleasing look complements various décors, ensuring that it not only serves a functional purpose but also enhances the overall ambiance of the room.

The Creda H050E boasts impressive heating capabilities, with a power rating of 500W. This allows it to quickly elevate the temperature in small to medium-sized rooms, providing comfort even in the coldest conditions. With its reliable thermostat control, users can easily set and maintain their desired temperature, promoting energy efficiency and reducing unnecessary energy consumption.

Safety is a key consideration in the design of the Creda H050E. It comes equipped with several protective features, including an overheat protection mechanism that ensures the unit automatically switches off if it becomes too hot. This significantly reduces the risk of accidents and offers peace of mind for users.

Moreover, the Creda H050E is built with a fan-assisted heating system. This unique technology allows for even distribution of warm air throughout the room, eliminating cold spots and ensuring that every corner of the room is heated efficiently. The quiet operation of the fan further enhances the user experience, allowing for a comfortable and peaceful environment.

In terms of installation, the Creda H050E is straightforward to set up. It can be mounted on the wall, making it a great choice for spaces where floor space is at a premium. The unit is also lightweight, allowing for easy relocation if necessary.

Overall, the Creda H050E stands out in the electric heater market for its combination of efficiency, safety, and design flexibility. Whether you need to warm up a home office, bedroom, or living area, this heater delivers consistent performance, ensuring that you stay comfortable during chilly weather. With its thoughtful features and reliable technology, the Creda H050E is an excellent choice for anyone looking to invest in an effective heating solution.

Creda H050E manual Care and Cleaning

Models: H050E