Installation

SITING

The cooker is designed to fit between kitchen cabinets spaced 500mm apart minimum. The space either side need only be sufficient to allow withdrawal of the cooker for servicing. It can be used with cabinets one side or both as well as in an angled corner setting. It can also be used free-standing.

Adjacent side walls which project above hob level, should be protected by heat resistant material, but in any case should not be nearer to the cooker than 150mm. Any overhanging surface should not be nearer than 500mm.

Excess steam from the oven is expelled at the rear of the cooker, therefore the wall behind the cooker needs to be protected against grease and moisture.

This is a type X appliance regarding protection against overheating of surrounding surfaces.

MOVING THE COOKER

Before moving your cooker ensure that it is cool and note that it is heavy. Movement of your cooker is most easily achieved by lifting the front as follows: Open the oven door sufficiently to allow a comfortable grip on the underside front edge of the oven roof.

Note: Take care when moving the cooker as it is heavy. Take care to ensure that any floor covering is not damaged.

 

500mm

 

(6")

(20")

(6")

150mm

 

150mm

MIN.

 

MIN.

500mm (MIN)

APPLIANCE

 

21

Page 21
Image 21
Creda H050E manual Siting, Moving the Cooker

H050E specifications

The Creda H050E is a state-of-the-art electric heater that has gained popularity for its reliable performance and user-friendly features. Designed with advanced technology, it delivers efficient heating solutions for various indoor spaces, making it suitable for both residential and commercial environments.

One of the standout features of the Creda H050E is its compact and sleek design. This makes it easy to integrate into any room without occupying excessive space. Its aesthetically pleasing look complements various décors, ensuring that it not only serves a functional purpose but also enhances the overall ambiance of the room.

The Creda H050E boasts impressive heating capabilities, with a power rating of 500W. This allows it to quickly elevate the temperature in small to medium-sized rooms, providing comfort even in the coldest conditions. With its reliable thermostat control, users can easily set and maintain their desired temperature, promoting energy efficiency and reducing unnecessary energy consumption.

Safety is a key consideration in the design of the Creda H050E. It comes equipped with several protective features, including an overheat protection mechanism that ensures the unit automatically switches off if it becomes too hot. This significantly reduces the risk of accidents and offers peace of mind for users.

Moreover, the Creda H050E is built with a fan-assisted heating system. This unique technology allows for even distribution of warm air throughout the room, eliminating cold spots and ensuring that every corner of the room is heated efficiently. The quiet operation of the fan further enhances the user experience, allowing for a comfortable and peaceful environment.

In terms of installation, the Creda H050E is straightforward to set up. It can be mounted on the wall, making it a great choice for spaces where floor space is at a premium. The unit is also lightweight, allowing for easy relocation if necessary.

Overall, the Creda H050E stands out in the electric heater market for its combination of efficiency, safety, and design flexibility. Whether you need to warm up a home office, bedroom, or living area, this heater delivers consistent performance, ensuring that you stay comfortable during chilly weather. With its thoughtful features and reliable technology, the Creda H050E is an excellent choice for anyone looking to invest in an effective heating solution.