5925 Heisley Road • Mentor, OH
HOW TO CLEAN THE UNIT:
BEFORE cleaning the cabinet:
1.Unplug cord from wall. Allow cabinet to cool.
2.Do NOT hose cabinet with water.
3.Do NOT get water on controls.
4.Do NOT use abrasives or harsh chemicals.
Wipe up spills as soon as possible. Clean regularly to avoid heavy dirt build- up.
Undercounter Ovens | |
Rev. 2 (2/05) | Page 5 of 9 |
|
|
Cleaning Hints:
1.Use the mildest cleaning procedure that will do the job.
2.Always rub in the direction of polish lines to avoid scratching the surface.
3.Use only a soft cloth, sponge, fibrous brushes, plastic or stainless steel pads for cleaning and scouring.
4.Rinse thoroughly with fresh water after every cleaning operation.
5.Always wipe dry to avoid water marks.
| SOIL | CLEANER | METHOD | ||
CABINET | Routine Cleaning | Soap, ammonia or mild | 1. | Sponge on with cloth | |
detergent* and water. | 2. | Rinse | |||
|
| ||||
| Stubborn Spots, | Mild abrasive made for | 1. | Apply with damp | |
| sponge or cloth. | ||||
| Stains | Stainless Steel. | |||
Inside and | 2. | Rub lightly. | |||
|
| ||||
Burnt on Foods or | Chemical oven cleaner | Follow oven cleaner | |||
Outside | |||||
Grease | made for Stainless Steel. | manufacturer’s directions. | |||
| |||||
| Hard Water Spots |
| 1. | Swab or wipe with | |
(Stainless Steel) | Vinegar | cloth. | |||
& Scale |
| 2. | Rinse and dry. | ||
|
|
|
*MILD DETERGENTS INCLUDE SOAPS AND
MAINTENANCE INSTRUCTIONS
IF UNIT GETS TOO HOT OR WON’T SHUT OFF, DISCONNECT
POWER AT BRANCH PANEL. DO NOT UNPLUG CORD!
If hot unit is NOT working, first check the following causes:
1.Cord is unplugged from wall outlet.
2.Circuit breaker/fuse to wall outlet is blown.
3.Switch is turned off.
4.Thermostat is turned off, or is set too low.