Cres Cor FL-2291 Installation Instructions, Heisley Road Mentor, OH, How To Install Cabinets

5925 Heisley Road • Mentor, OH 44060-1833

Undercounter	FL-2291
Ovens
Rev. 3 (5/08)	Page 3 of 10

INSTALLATION INSTRUCTIONS

VENTING YOUR OVEN:

1.The purpose of ventilating hoods is to direct and capture smoke, grease-laden vapors, heat, odors, or fumes.

2.Low temperature equipment (maximum temperature 250°F/121°C) does not produce heat, odors, fumes, grease-laden vapors or smoke and is not required to be vented.

3.Most jurisdictions consider our low-temperature ovens (maximum temperature is 350°F/177°C) as low-heat appliances not requiring vent hoods.

4.Installation must conform with local codes. The authority having jurisdiction of enforcement of the codes will have the responsibility for making interpretations of the rules.

ELECTRICAL SPECIFICATIONS

MODEL NO.	Volts	Watts	Amps	Hertz	Ph	NEMA
CO151XWUA5B1201	120	2000	16.6	60	1	5-20P

All models are designed for AC Service. Model numbers may have the letters: L, M, or S.

HOW TO INSTALL CABINETS:

1.Remove all packing material from inside and outside of cabinet.

2.Position cabinet on level floor; install the cabinet interior (pan slides) if not already installed.

3.Plug power cord into proper wall receptacle.

4.Fill water pan with three (3) gallons of HOT water (see CAUTION).

LOW WATER LIGHT:

When water needs to be added to the pan, the Low Water Light will stay on until the pan is refilled

CAUTION

Use of treated water is recommended for proper operation and to maintain warranty.

It will reduce scaling.

Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com