5925 Heisley Road • Mentor, OH 44060-1833
Ovens with | |
Microprocessor Controls | |
Rev. 10 (6/08) | Page 13 of 13 |
|
|
OPERATING INSTRUCTIONS
FOR OVENS WITH OPTIONAL PRODUCT KEYS
POWER SWITCH | PRODUCT KEYS | PROBE RECEPTACLE | CONTROL |
ON | MODE | TIME - TEMPERATURE |
| |
|
| |||
| PROBE | TIMED |
|
|
| SELECT | HEAT | COOK | HOLD |
|
| OVEN | START | STOP |
|
| TEMP |
|
|
OFF
SETPOINTS
RETHERM
COOK
TIME
SET
PROBE
HOLD
POWER
CONTROL PANEL
The Product Keys provide automatic menu selections (arranged in banks of 5 keys, max. 10 keys). Each Product Key can be user programmed for desired mode (PROBE or TIMED) and the required COOK, HOLD, and PROBE or TIME setpoints.
Each Product Key Lights up when pressed “ON”. The Product Key Light will go “OFF” when pressed a second time or when changing any setpoint value. This returns the control to manual operation.
Product Key Programming
1.Press the desired Product Key.
2.Press and hold the SET key until the Product Key light begins to flash.
3.Enter the desired Mode, Cook, Hold and Probe/Time values.
NOTE: Press the SET key after each value is changed or
added to accept and store a new setpoint.
4.To exit; Press the SET key for a few seconds until the Product Key light is extinguished.
Extra Replacement Parts:
Product Key (5 Keys)
For Hot Unit Replacement, See Page 9:
The Hot Unit suffix number will be Q5 (5 Keys) or Q10 (10 Keys) instead of Q1
Call
