Cres Cor RO151HUA9 manual Maintenance Instructions How To Clean The Unit, Heisley Road Mentor, OH

Ovens	FL-2202-MP-M
Rev. 1 (4/08)	Page 6 of 10	5925 Heisley Road • Mentor, OH 44060-1833

MAINTENANCE INSTRUCTIONS

HOW TO CLEAN THE UNIT

CAUTION

1.ALLOW CABINET TO COOL.

2.REMOVE HOT UNIT BEFORE CLEANING.

Wipe up spills as soon as possible.

Clean regularly to avoid heavy dirt build-up.

HOW TO CLEAN THE UNIT:

Cleaning Hints:

1.Use the mildest cleaning procedure that will do the job.

2.Always rub in the direction of the polish lines to avoid scratching the surface.

3.Use only a soft cloth, sponge, fibrous brushes, plastic or stainless steel pad for cleaning and scouring.

4.Rinse thoroughly with fresh water after every cleaning operation.

5.Always wipe dry to avoid water marks.

	SOIL	CLEANER	METHOD
	ROUTINE CLEANING	Soap, ammonia or mild	1.	Sponge on with cloth
		detergent* and water.	2.	Rinse
CABINET	STUBBORN SPOTS,	Mild abrasive made for	1. Apply with damp sponge or cloth.
Inside and Outside	STAINS	Stainless Steel.	2.	Rub lightly.
	BURNT ON FOODS OR	Chemical oven cleaner	Follow oven cleaner manufacturer’s
(Stainless Steel)	GREASE	made for Stainless Steel.	directions.
	HARD WATER SPOTS &	Vinegar	1. Swab or wipe with cloth.
	SCALE		2.	Rinse and dry.
	* Mild detergents include soaps and non-abrasive cleaners

MAINTENANCE INSTRUCTIONS

TROUBLE-SHOOTING GUIDE

WARNING

IF UNIT GETS TOO HOT OR WON’T SHUT OFF, DISCONNECT

POWER AT BRANCH PANEL. DO NOT UNPLUG CORD!

If hot unit is NOT working, first check the following causes:

1.Cord is unplugged from wall outlet.

2.Circuit breaker/fuse to wall outlet is blown.

3.Switch is turned off.

4.Thermostat is turned off, or is set too low.

Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com