Crestron electronic C2N-DAP8RC Digital Audio Processor with Room Control Crestron C2N-DAP8RC , Surround Sound Modes

Digital Audio Processor with Room Control Crestron C2N-DAP8RC

2 • Digital Audio Processor with Room Control: C2N-DAP8RC Operations Guide - DOC. 8187A

Functional Summary – Video I/O & Miscellaneous

The CNAMPX-7x200 7-channel, 200 watts per channel surround sound amplifier is

the ideal companion product to the C2N-DAP8RC surround sound processor.

The C2N-DAP8RC provides digital surround sound processing along with CAT5

head end/local AV distribution and room control functions. The result is cost-

effective surround sound in any room of the house.

The C2N-DAP8RC provides the following surround sound modes, permitting choice

of the format that best suits the entertainment medium selected, the specific

characteristics of the listening/viewing area, and the personal preferences of the

listener.

Typically, 5.1-channel audio consists of five discrete, full-range main channels (left,

center, right, left surround, and right surround) plus an optional band-limited low

frequency effects (LFE) channel for added bass (subwoofer). Dolby Digital

bitstreams deliver full frequency bandwidth main channels, from 3 Hz to 20 kHz,

and a limited frequency bandwidth LFE channel, from 3 Hz to 120 Hz.

As a descendent of the advanced technology used in Dolby Stereo theaters, Dolby

Pro Logic Surround decoders give enhanced spatial and directional effects when

used in the home environment. Sophisticated logic steering techniques are used to

extend the impact of the soundtrack over a wider listening area. Wide separation,

smooth dynamic action, and proper spatial imaging are key characteristics of Pro

Logic decoders.

Dolby Pro Logic II creates five full-bandwidth output channels from two-channel

sources. This is done using an advanced, high-purity matrix surround decoder that

extracts the spatial properties of the original recording without adding any new

sounds or tonal colorations.

• One RJ-45 - four channels of balanced video input; three

channels with input level compensation adjustments

• One RJ-45 - four channels of balanced video output

• Twelve RCA local (analog) video inputs - any combination of

composite, S, or component (including HDTV); each input

includes built-in video sensor.

• Twelve RCA local (analog) video outputs

• RJ-11 for RS-232 control of serial devices, or for

uploading/upgrading firmware for the C2N-DAP8RC

• Mini-Cresnet for connection to Cresnet devices and main

processor

• Four infrared (IR) output ports for control of third-party IR

devices (using STIRP), or for one-way RS-232.

• One IR input jack for CNXRMIRD sensor

• Front panel PWR and NET LEDs

• Touch-settable ID capable