Digital Audio Processor with Room Control Crestron C2N-DAP8RC
74 • Digital Audio Processor with Room Control: C2N-DAP8RC Operations Guide - DOC. 8187A
On the rising edge of <Store_EQ>, the six trim band values will be stored in the
preset specified by <Preset#>. Valid values for <Preset#> range from 1 to 10. The
<Preset#_F> output reports the current trim preset.
On the rising edge of <Recall_EQ> the values stored in the indicated <Preset#> will
be recalled and propagated to the outputs. Here the <EQ_FB> outputs may have
different values than the inputs.
Alternatively, a rising edge of a <Recall_EQ#> (1 through 10) input will recall that
trim preset.
The <EQ> inputs adjust the gains of the 6 filters; thus <EQ_1> corresponds to filter
#1, <EQ_2> corresponds to filter #2, and so forth. The gains are adjustable within a
range of –10 dB to +5 dB, and are applied equally to 7 of the 8 channels (the
subwoofer channel is excluded). All trim band values propagate immediately to the
outputs.
Valid values for <EQ> range from -100 (-10 dB) to +50 (+5 dB). An <EQ> value of
0 (0 dB) means that the signal will pass unaffected. Values above and below 0 will
boost or attenuate the gain in increments of .1 dB. That is, changing the analog value
by 1 signifies a 0.1 decibel boost or attenuation.