Crestron electronic MC2E Setting the Net ID in Device Settings

2-Series Professional Media Controller Crestron MC2E
MC2E Device Detail
NOTE: Slot1: C2NET-Device is never available on a control system operating in
slave mode. All other slots may be configured as described in this manual.
NOTE: Each port on the master and slave system that requires configuration must
be individually configured. In the example above, a COM port on Slot 3 of the slave
system must be configured separately from any COM port on Slot 4 of the master
system.
Setting the Net ID in Device Settings
Double-click the MC2E icon to open the “Device Settings” window. This window
displays the MC2E device information. If necessary, select the Net ID tab to change
the Net ID, as shown in the following figure.
“Device Settings” Window for the MC2E
NOTE: SIMPL Windows automatically changes the NET ID values of a device
added to a program if a duplicate device or a device with the same default NET ID
32 • 2-Series Professional Media Controller: MC2E Operations Guide - DOC. 6142