Crestron electronic MPS-300 - page 18

Multimedia Presentation System 300 Crestron MPS-300
Connectors, Controls & Indicators (Continued)
# CONNECTORS1,
CONTROLS &
INDICATORS
DESCRIPTION
8 MC/LN 1 – 2
(2) 5-pin 3.5 mm detachable terminal blocks;
Comprises (2) Balanced microphone/line
inputs;
Balanced Mic Input Level: -52 to -12 dBV,
240 mVrms maximum;
Balanced Line Input Level: -28 to +11 dBV;
3.7 Vrms maximum;
Unbalanced Line Input Level: -34 to +5 dBV;
1.85 Vrms maximum;
Mic Input Impedance: 3.9k ohms, accepts 60
to 600 ohm source;
Line Input Impedance: 19k ohms (balanced),
9.5k ohms (unbalanced);
Phantom Power: 10 mA (total) @ 48 Volts DC,
software enabled to both mic inputs
9 VIDEO INPUTS 1 - 2
RGBHV INPUTS 3 - 5
(2) sets of (3) BNC female video inputs, each
set configurable as:
• Component/HDTV (YPbPr) video
input, or
• S-video (Y/C) input, or
• Composite input
Input Level: 1 Vp-p nominal;
Input Impedance: 75 ohms nominal;
DC Offset: Insensitive to DC offset
(AC coupled);
Video signal sensing on COMP/Pb or Y/Y
(3) DB15HD female, RGBHV (VGA) inputs;
Format: RGBHV or RGBS;
RGB Input Level: 1 Vp-p nominal;
RGB Input Impedance: 75 ohms nominal;
Sync Input Level: 2 to 5 Vp-p;
Sync Input Impedance: 75, 500, or 1k ohms
individually selectable for H and V via bottom
panel DIP switch;
Video signal sensing on “H-SYNC”;
Defeatable DDC pull-up resistors
10 SYSTEM POWER
(1) pushbutton and green LED, controls
system power
11 PROJECTOR POWER
(1) pushbutton and green LED, controls
display device power
(Continued on following page)
14 • Multimedia Presentation System 300: MPS-300 Operations Guide – DOC. 6529B