Crestron Residential Lighting Design Guide

GreenLight Options–CAEN Enclosures

Green Light Options

CAEN- Series Enclosures

The CAEN Series automation enclosures are designed to house the Crestron CLX-series of lighting and motor control modules and PAC2 or PAC2M control systems. CAEN enclosures are available in an assortment of sizes, suitable for surface or flush wall mount installation. Each model has been engineered to provide a clean and manageable installation with abundant provisions for wire termination and electrical knockouts.

CAEN automation enclosures are designed to use space efficiently by supporting over a hundred possible circuits in the largest model. Both centralized and distributed configurations are possible. A single PAC2 control system installed in a central enclosure can support numerous satellite extension enclosures distributed throughout a residence or commercial facility. Interconnection of the complete network of enclosures requires just one circulating Cresnet® cable. Dozens of keypads, touchpanels, wall box dimmers, shade controllers, and other peripherals can also be terminated within an enclosure, with separate compartments provided for high and low voltage wiring.

Crestron lighting and automation systems are completely convection cooled for silent and reliable operation. A vented front cover is included with every enclosure.

All models are constructed of 16-gauge galvanized steel and are pre-drilled for mounting of the PAC2, PAC2M, terminal blocks, CLX modules, CLT power supplies, and CAEN-BLOCK terminal block.

Additional non-CLX lighting modules and third-party contactors may be installed using CAEN-UMP Crestron universal mounting plates. Grounding blocks and low voltage partitions included.

CAEN enclosures are also well suited for all types of Class 2 and Class 3 applications including voice and data structured wiring, security, and RF signal distribution (as permitted by applicable codes).

CAEN enclosures are UL and C-UL listed. If you require a complete UL listed panel, Crestron offers this service through its UL508 listed panel shop, providing complete in-factory system configuration and assembly.

NOTE: The PAC2 occupies two module spaces in a double- wide enclosure and one module space in a single-wide.

NOTE: Four keyholes are located within the enclosure and should be used if surface mounting.

Doc. 5999F

11

Page 16
Image 16
Crestron electronic Residential Lighting manual Green Light Options, CAEN- Series Enclosures