Crestron electronic Residential Lighting manual DIN-AO8, DIN-IO8, Analog Outputs, Versiports

Crestron Residential Lighting Design Guide DIN Rail Products

DIN-AO8

The DIN-AO8 is a DIN Rail-mounted automation control module that provides eight analog output ports for interfacing with third-party lighting and heating/cooling systems.

Analog Outputs

Each analog output port provides a 0 to 10 volt DC control signal ideally suited for controlling 0-10V lighting dimmers and heating/cooling valves. 10-bit resolution ensures precise recall of lighting and climate control settings and smooth ramping between levels.

Features

∙Eight 0-10V analog output control ports (Maximum sink current 20mA per channel)

∙Interface for 3rd-party lighting and heating/cooling

∙Fully programmable functionality via DIN-AP2 Setup via front panel or software

DIN-IO8

The DIN-IO8 is a DIN Rail-mounted automation control module that provides eight Versiport I/O ports for interfacing with a wide range of third-party devices and systems. Each Versiport can be configured via software to function as

a digital or analog sensing input or as a digital trigger output.

Features

∙8 Versiport I/O ports

∙Interface for 3rd-party sensors, detectors, contact closures, and alarms

∙Fully programmable functionality via DIN-AP2

Versiports

Configured as a digital input, the Versiport senses a contact closure or logic level signal from devices such as motion detectors, partition sensors, alarm panels, 12V triggers, and all types of switches and relays. As an analog input, the Versiport can sense changes in a resistance or DC voltage level, working with everything from temperature and light sensors to water level meters to volume control potentiometers. As a digital output, the Versiport provides

a logic level closure signal to trigger control and alarm inputs on a variety of external devices.

Doc. 5999F 28