![](/images/new-backgrounds/1134767/13476715x1.webp)
P r e p a r a t i o n s
CAUTION: To set up this unit, you will need assistance. Do not attempt assembly by yourself.
You must review and follow the instructions in this Owner’s Manual. If you do not assemble and use the G2B according to these guidelines, you could void the
Required Tools
The tools that you must obtain before assembling the G2B include:
χ4mm Allen Key
χ5mm Allen Key
χ6mm Allen Key
χ8mm Allen Key
χ9/16”
χ11/16”
χ13/16”
χ3/4”
χ9/16” Box Wrench
χ11/16” Box Wrench
χ13/16” Box Wrench
χ3/4” Box Wrench
Installation Requirements
Follow these installation requirements when assembling the G2B:
Set up the G2B on a solid, flat surface. A smooth, flat surface under the machine helps keep it level. A level machine has fewer malfunctions.
Provide ample space around the machine. Open space around the machine allows for easier access.
Insert all bolts in the same direction. For aesthetic purposes, insert all bolts in the same direction unless specified (in text or illustrations) to do otherwise.
Leave room for adjustments. Tighten fasteners such as bolts, nuts, and screws so the unit is stable, but leave room for adjustments. Do not fully tighten fasteners until instructed in the assembly steps to do so.
CAUTION: Obtain assistance! Do not attempt to assemble the G2B by yourself. Review the Installation Requirements before proceeding with the following steps.
The G2B unit comes in seven boxes. Be careful to assemble components in the sequence presented in this guide.
NOTE: With so many assembled parts, proper alignment and adjustment is critical. While tightening the nuts and bolts, be sure to leave room for adjustments.
Fill out and mail warranty card.
8