A s s e m b l y I n s t r u c t i o n s
Assembly of the G2B takes professional installers about 3 hours to complete. If this is the first time you have assembled this type of equipment, plan on significantly more time.
Professional installers are highly recommended!
However, if you acquire the appropriate tools, obtain assistance, and follow the assembly steps sequentially, the process will take time, but is fairly easy.
Assembly Tips
Read all “Notes” on each page before beginning each step.
While you may be able to assemble the G2B using the illustrations only, important safety notes and other tips are included in the text.
Some pieces may have extra holes that you will not use. Use only those holes indicated in the instructions and illustrations.
NOTE: To find out the length of a particular bolt, measure its shank (the long, narrow part beneath the head). Refer to the following diagram:
IMPORTANT!
Before you begin you should fold-out pages 82, 83 and 84.
This is a quick reference guide that shows all hardware parts (in actual size) along with the corresponding key numbers on the assembly instructions.
Do not fully tighten bolts until instructed to do so.
Note: After assembly, you should check all functions to ensure correct operation. If you experience problems, first recheck the assembly instructions to locate any possible errors made during assembly. If you are unable to correct the problem, call the dealer from whom you purchased the machine or call
mm
Inch
9
