Body Solid G2B manual CABLESλ, UPHOLSTERYλ, NUTS/BOLTS/FASTENERSλ, Guide RODSλ, ANTI-SKIDλSURFACES

W a r n i n g , S a f e t y & M a i n t e n a n c e

Precision craftsmanship assures Body-Solid’s ability to consistently deliver products of the highest standards. Our products have been carefully designed to ensure safe, efficient long term operation.

However, it must be realized that safe use of this equipment requires that owners carefully read and follow the Body-Solid use recommendations, warnings, and maintenance guidelines in this Owners Manual.

Routine inspection and maintenance is of critical importance to ensure the maximum safety and performance of the G2B. Body-Solid uses the highest quality materials available, but wear is inevitable. Therefore, you must carefully inspect your equipment as outlined in the Maintenance Schedule on the next page.

Be advised that dangerous conditions can arise even during a warranty period. A warranty does not negate the owner’s responsibility to thoroughly, carefully and daily inspect the machine.

Including maintaning the equipment the owner’s responsibility is also to:

λBe sure to always provide adequate supervision to all end-users.

λBe sure to instruct all end-users of proper usage.

λBe sure all supervisors and personal trainers who instruct end-users on equipment use are properly trained and know the function and importance of every adjustment and setting. Also, be sure these trainers provide proper instruction to end-users on the fundamentals of strength training.

CABLES:λ

While the machine is not in use. Carefully run your fingers along the cable to feel for thinning or bulging areas. Replace cables immediately at the first sign of damage or wear. Do not use equipment until damaged cable has been replaced.

λVisually inspect the cables for fraying, cracking, peeling or discoloration.

λCheck slack in cables and re-adjust cable tension if needed. See pages 38-39.

λCheck that the jam nut on the selector rod top bolt is tight.

UPHOLSTERY:λ

Wipe down after every workout.

λPeriodically take the time to use a mild soap or a mild vinyl upholstery cleaner. Avoid using any abrasive cleaner not intended for use on vinyl.

λKeep sharp or pointed objects out of your pockets and clear of all upholstery.

NUTS/BOLTS/FASTENERS:λ

Periodically inspect all nuts and bolts. Tighten if needed. If bolts seem to loosen periodically, use Loctite 242 for a long-term cure.

λGo through a re-tightening sequence periodically to ensure that all hardware is properly tensioned.

GUIDE RODS:λ

Wipe clean with a dust free rag. Lubricate with a Silicon or Teflon based lubricant.

ADJUSTMENTS / LOCKING PINS / TIGHTENING KNOBS:λ

Check all pieces for signs of visible wear or damage.

λCheck springs in Snap Links and Pop Pins for proper tension and alignment.

λIf the spring sticks or has lost its rigidity, replace it immediatly.

ANTI-SKIDλSURFACES:

Replace if they appear worn or become slippery.

WARNINGλ INSTRUCTION LABELS:

Inspect and familiarize yourself with all safety warnings and other user information on decals.

48