![Blade adjustment](/images/new-backgrounds/87239/8723947x1.webp)
ENGLISH
Blade adjustment
Level 2.
Tools required: (2) 10 mm Sockets and Extensions
Parts required: None
WARNING
Hedge trimmer blades are very sharp. Touching them may lead to severe personal injury. Use a socket and extension when adjust- ing blade bolts or blade locknuts in order to keep hands at a safe distance from sharp blades.
IMPORTANT
Blades should only be removed and reinstalled by an Authorized Shindaiwa Servicing Dealer, otherwise premature wear or internal damage may occur.
1.Tighten blade bolts until snug, then loosen blade bolts 1/2 turn.
2.Hold blade bolts from turning using 10 mm socket, and tighten blade lock nuts with other 10 mm socket.
note
Locking ability of Hedge Trimmer blade lock nuts will diminish each time they are removed. Replace if turning resistance is not felt when installing locknuts.
24