Shindaiwa DH212, 82053 manual Maintenance intervals, English, Do-It-YourselfMaintenance Procedures

ENGLISH

Maintenance intervals

COMPONENT/	MAINTENANCE	REQ'D	DAILY OR		3	6	YEARLY
				EVERY	MONTHS	MONTHS
		SKILL	BEFORE				600
SYSTEM	PROCEDURE			REFUEL	OR 90	OR 270
		LEVEL	USE				HOURS
					HOURS	HOURS
	Recommended Shindaiwa Dealer Maintenance Procedures
Cylinder Exhaust Port	Inspect/Clean/Decarbon	3			I / C
Sharpen Blades	Inspect/Clean	3	I (2)
	Do-It-Yourself Maintenance Procedures
Air Filter	Inspect/Clean/Replace	1	I / C		R*
Choke	Inspect/Clean	2	I / C
Fuel Filter	Inspect/Replace	1			I		R *
Fuel System, leaks	Inspect/Replace	1	I (3) *	I (3)
Cooling System	Inspect/Clean	2	I / C
Muffler Spark Arrestor	Inspect/Replace	2			I / R *
Gear Housing	Grease	2	I (1)
Blades	Inspect/Clean	1	I / C (2)
Recoil Starter Rope	Inspect/Clean	1	I / C *
Spark Plug	Inspect/Clean	2			I / C	R *
Screws/Nuts/Bolts	Inspect/Tighten/Replace	1	I / R *

MAINTENANCE PROCEDURE LETTER CODES: I = INSPECT, R = REPLACE, C = CLEAN

IMPORTANT NOTE - Time intervals shown are maximum. Actual use and your experience will determine the frequency of required maintenance.

MAINTENANCE PROCEDURE NOTES:

(1)Apply high quality lithium -based grease every 15 - 25 hours.

(2)Inspect blade and clean and sharpen as needed. Lubricate blades periodically during use.

(3)Low evaporative fuel tanks DO NOT require regular maintenance to maintain emission integrity. * All recommendations to replace are based on the finding of damage or wear during inspection..

16