Wiring

CONTROL MODULE / COMPONENT MOUNTING

DO NOT Mount the control unit or wiring harness in the engine compartment or anywhere they can become entangled with moving parts such as brake/gas/clutch pedals, or the steering column. The alarm control module should be mounted in a concealed location. The antenna wire should be routed away from any metal if possible. Do not alter the length of the antenna, ground it, or route it with other wires.

SIREN MOUNTING: Mount the siren under the hood to fender-well or other body surface with the open end facing downward. Run the red siren wire through the firewall using a rubber grommet. Ground the black wire to the body.

LED: Mount the red LED in a visible location on the dashboard or console.

Shock Sensor: Mount the included shock sensor with wire ties to an under dash wire harness or fasten with screws to firewall or side paneling.

Override/Program Button: Mount the Override/Program push-button in a hidden but accessible location. It is used for emergency disarm without the use of the transmitter and for programming certain features.

RED WIRE: +12V POWER INPUT (15 Amp Fuse)

Connect to a +12 Volt source with the supplied fuse and fuse-holder. We recommend the connection to be at the Vehicle’s Battery Positive Terminal.

BLACK WIRE: CHASSIS GROUND

THIS WIRE MUST BE CONNECTED TO THE CHASSIS METAL OF THE VEHICLE. Scrape away any paint or dirt to ensure a good connection.

YELLOW WIRE: IGNITION SWITCHED “ON” and “START” +12 VOLTS

Connect to a (+) Ignition wire that shows +12 Volts when the key is in both the “ON” and “Cranking” positions.

ORANGE WIRE: (-) NEGATIVE ARMED OUTPUT

This wire becomes a Negative Ground output when system is armed. This output can be used for additional starter disable relays or to activate other devices such as scanner LED’s, window modules, voice modules etc.

WHITE WIRE: +12V FLASHING PARKING LIGHT OUTPUT (Optional)

Connect to switched parking light wire at back of light switch or connect directly to one of the parking lights at the front of the vehicle. European vehicles may require additional parts due to separate left and right circuits.

	BROWN WIRE: (+) SIREN OUTPUT (3 Amp Max.)	3
	Connect to the siren’s RED wire. Connect the Siren’s Black Ground wire to the chassis close to the siren.	3

CS-2004TW1, CS-2004DC specifications

Crimestopper Security Products has built a reputation for offering high-quality security systems that cater to various needs in vehicle security. Among its lineup, the Crimestopper CS-2004DC and CS-2004TW1 models stand out with a range of advanced features that enhance vehicle protection and convenience.

The Crimestopper CS-2004DC is a comprehensive security and keyless entry system that integrates several impressive functions, designed to provide maximum security for your vehicle. One of its main features is the two-way remote control communication, which allows the user to receive feedback from the vehicle when commands are sent. This is particularly useful for ensuring that commands like locking or unlocking the doors have been executed correctly. The system also includes a built-in LED status indicator and an audible confirmation signal, further enhancing user awareness.

On the other hand, the CS-2004TW1 model features a similar set of advanced functions with the addition of a sleek design and enhanced range. Like the CS-2004DC, the CS-2004TW1 includes two-way communication, but it also features a more robust transmitter with extended range capabilities, providing convenience even at greater distances from the vehicle. This model offers a 4-button remote, making it easy to control a variety of functions such as trunk release, panic mode, and remote start.

Both models utilize Crimestopper's advanced technology, which includes a virtual alarm system equipped with adjustable sensitivity settings. This technology allows the user to tailor the system to their specific environment, reducing false alarms triggered by environmental factors such as wind or passing vehicles. Furthermore, the inclusion of an onboard shock sensor enhances the systems' responsiveness to unauthorized entry attempts.

Additionally, the Crimestopper CS-2004 series is designed for easy installation. Most of the features can be integrated into newer vehicle models without extensive modifications. This ease of installation, coupled with the system's reliability, makes it a compelling choice for vehicle owners concerned about security.

In summary, the Crimestopper CS-2004DC and CS-2004TW1 are exemplary vehicle security solutions, combining advanced technology with user-friendly design. Their two-way communication, adjustable sensitivity, and robust remote controls offer both security and convenience for vehicle owners, securing peace of mind in today’s world. Whether you are looking to bolster your vehicle's defenses or simply enjoy the added convenience of keyless entry, these models are designed to meet demanding security needs while providing reliable and efficient performance.

Crimestopper Security Products CS-2004TW1, CS-2004DC Control Module / Component Mounting, Wiring

Models: CS-2004TW1 CS-2004DC