Crimestopper Security Products installation manual Notice-Disclaimer, SV-6400ClipCam

SV-6400 ClipCam

SAFETY PRECAUTIONS

zMake sure to read the “Installation Manual” for safety precautions before installing unit or accessories.

zPlease make sure the vehicle is well parked in a safe place. Make sure that the engine and the power are switched off.

zAvoid installation outdoors during rain or thunder storms.

zThe instructions presented in this manual are based on the passenger seat at the right of the driver’s seat. In an opposite situation, change the directions accordingly.

zObjects on the monitor are closer than they appear.

zThis ClipCam camera is not a safety device. Safe driving is the driver’s responsibility in all circumstances.

NOTICE-DISCLAIMER

Under no circumstances shall the manufacturer or distributor of the ClipCam be held liable for consequential or incidental damages sustained in connection with the use of the ClipCam rear vision system. The ClipCam is designed as a safety enhancement device and is in no way intended as a replacement for rear-view mirrors, side-view mirrors or physically checking the surroundings when backing a vehicle. Always check surroundings for safety when backing. Objects on the monitor are closer than they appear. For the best fit, modification of the vehicle license may or may not be necessary. It is the sole responsibility of the vehicle owner to check and verify any and all state or federal motor vehicle codes with regard to modifications of vehicle license plates.

Compilation and Publication Notice

Under the supervision of PEC, this manual has been compiled and published, covering the latest description and specification. The contents of this manual and the specifications of this product are subject to change without notice. PEC reserves the right to make changes without notice in the specification and material contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publication.

Page 1 of 8