6.Optional installation: Sometimes the space between vehicle license plate and rear trunk lip area is very narrow, which may cause problems when installing the ClipCam. An adjustable bracket is available to deal with this problem. Install the adjustable bracket to move up the license plate until you have enough space to install the ClipCam.
Step 4: Wire Connection
1.Connect the power source line to the camera. Also connect a 20’ cable with monitor. (Refer to Diagram 4.1)
RED Power Input 12V(+)
BLACK Power Input
Connector
Standard Cable Connector
Video Output
Diagram 4.1-1
4 pin connector
21
4 |
| 3 |
|
|
|
|
|
Pin No. |
| ||
1 | Video Output | ||
|
|
|
|
2 | Power DC 12V | ||
|
|
|
|
3 | GND | ||
4 |
|
|
|
|
|
|
|
Video output to monitor
Clip Cam
Black, Ground
Red, power input 12V (+) from reverse light
Diagram
12 PIN (M) | 4 PIN (M) |
12 PIN (F)
4 PIN (F)