Crimestopper Security Products SV-6400 Insert the camera clip into the camera housing

2.When making your selection, choose the tighter fit of the 2 camera clips that are included.

3.Insert the camera clip into the camera housing.

4.If for any reason you need to change the camera clip size, please open the pre-cut window at the back side of the camera. Next, use a flat screw driver to lift up the camera clip enough to remove it from the camera housing. Change to the correct camera clip and reinsert into the camera housing. (Refer to the diagrams on the following page).

Diagram 4.ADiagram 4.B

5. For better viewing angles, place the ClipCam at the center of the trunk lip.

Rear Trunk Lip

Page 4 of 8