INSTALLATION CAUTIONS & WARNINGS

BEFORE BEGINNING, check all vehicle manufacturer cautions and warnings regarding electrical service (AIR BAGS, ABS BRAKES, ENGINE COMPUTERS, and BATTERY etc.).

WE RECOMMEND the use of a VOLT/OHM METER to test and verify wiring circuits. Test lights or illuminated probes can cause damage to on-board computer or engine management systems.

DO NOT exceed maximum output ratings or damage may occur. Electrical current limits for the TrakNet are listed where applicable on the system diagram. If you are unsure about the current load, of a specific circuit on your vehicle, measure the load first with an amp-meter before connecting.

WE RECOMMEND that the MAIN SYSTEM FUSE be REMOVED before jump starting, using a battery charger, or changing the battery. A voltage surge or high boost condition could damage alarm circuits.

DO NOT ROUTE ANY WIRING THAT MAY BECOME ENTANGLED with brake, and gas pedals, steering column, or any other moving parts in the vehicle.

CONTROL MODULE & COMPONENT MOUNTING

DO NOT Mount the control unit in the engine compartment or where the control unit or wiring harness where they can become entangled with moving parts such as brake/gas/clutch pedals, or the steering column! The TrakNet control module and back up battery should be mounted in a concealed location. The antenna wire should be routed away from any metal if possible. Do not alter the length of the antenna wire or route it with other wires. Do not ground the antenna wire. Fasten the module to a bracket or wire harness using the cable ties. Under dash Mounting: If you are locating the control unit under dash, mount it as high as possible, not easily located.

Antenna: The antenna location must be selected carefully so that the antenna can receive the satellite signals. The antenna is designed to be mounted inside the vehicle. The ideal location is in a place that allows line of sight reception from the GPS satellites. The antenna must be mounted flat with the GPS receiver facing up. The ideal location is under the dashboard. It can be placed under the dash pad as long as the covering is not metallic. The antenna works best if it has a clear view of the sky. Do not mount antenna under a window that has metallic tint on it. This will affect the reception of the unit.

3

Page 3
Image 3
Crimestopper Security Products TN-4003, TN-4004 Installation Cautions & Warnings, Control Module & Component Mounting

TN-4003, TN-4004 specifications

Crimestopper Security Products has established a formidable reputation in the field of vehicle security systems, and their TN-4003 and TN-4004 models are perfect examples of this commitment to innovative technology and high-quality performance. These systems are designed to enhance the security of your vehicle, offering peace of mind and protection against theft and vandalism.

The TN-4003 is a technologically advanced vehicle security system that features a two-way remote control, providing users with real-time feedback on their vehicle's status. It allows you to arm and disarm your security system from a distance, and the LCD screen on the remote displays critical information, such as if the alarm has been triggered. This feature provides an added layer of security, enabling quick responses in critical situations. The system includes a built-in shock sensor that detects any unauthorized entry or impact, instantly alerting the owner with a loud siren. Additionally, it is equipped with a range of adjustable sensitivity settings, allowing users to configure the system according to their environment.

Similarly, the TN-4004 offers enhanced capabilities with its 1-way remote system and similar features to its counterpart. It includes an array of advanced technologies such as automatic rearming, ensuring that your vehicle remains protected even if you forget to activate the system after entry. This model also features a dual-zone shock sensor, which distinguishes between light and heavy impacts, providing tailored responses based on the severity of the incident.

Both models boast easy installation processes, making them appealing to both professional installers and DIY enthusiasts. With a compact design, they can seamlessly integrate into various vehicle types without compromising aesthetics. The systems also come with a comprehensive installation guide to simplify the process further.

Built with durability in mind, both the TN-4003 and TN-4004 are constructed using high-quality materials to withstand environmental challenges, ensuring longevity and reliability. They are designed to operate in a wide range of temperatures, making them suitable for various climates.

In summary, Crimestopper's TN-4003 and TN-4004 models represent cutting-edge vehicle security solutions, offering robust protection features like shock sensors, two-way communication, and adjustable settings. Their user-friendly installation process and durable design make them ideal choices for drivers seeking peace of mind in safeguarding their vehicles.