27
Heavy Work Clothes
4 jeans 2 sweatpants
4 work pants 2 sweatshirts
4 work shirts
Cotton/Towels
10 bath towels 14 wash cloths
10 hand towels
Mixed Load
3 sheets 9 T-shirts
4 pillow cases 9 Shorts
3 shirts 10 handkerchiefs
3 blouses
Following are sample loads for Super Capacity
Dryers:
NOTE: DRY LEVEL selections can only be made
while using Sensor Dry Cycles.
Selecting MORE Dry or LESS Dry
automatically adjusts the needed time
which is already sensed.
NOTE: DRY LEVEL selections can only be made
while using Sensor Dry Cycles. Selecting
MORE Dry or LESS Dry automatically
adjusts the sensed time needed.
• Use these buttons to set dry level
• First, select sensor dry cycle.
• Select dry level to adjust how much
you want to dry the load.
As the cycle runs, the control
senses the dryness of the load and
adjusts the time automatically
based on the selected dryness level.

Dry Level

10
• The BEEPER controls the volume
of the beep that is made when you
press any of the buttons on the
control panel. Press BEEPER to
adjust the sound level or turn off the
signal.

Beeper

11
• Use this button for start or pause.

Start / Pause Button

12
11Before use
• Clean lint screen before or after each cycle.
• Place laundry into dryer and shut door. See
Loading.
• Turn the knob to select the drying cycle you want.
The preset setting for Sensor Dry Cycles or Manual
Cycles will glow. The estimated or actual cycle time
(in minutes) will show in the display.
22Loading
• Determine load size by the amount of space the
load requires rather than the weight of the load.
• Avoid overloading the dryer.
Following these instructions can help reduce
your utility bill, prolong the life of your clothes,
and decrease the likelihood of uneven drying
and wrinkle.
33To use a sensor dry cycle
• Select DRY LEVEL to adjust how dry you want
the load. As the cycle runs, the control senses
the dryness of the load and adjusts the time
automatically for the selected dryness level.
• Select the desired options.
• Press START/PAUSE
Starting your dryer