Crown CTS 2000, CTS 3000, CTS 1200, CTS 600 Commercial Audio Accessories, A C C E S S O R I E S

ACCESSORIES & APPLICATIONS ACCESSORIES

Accessories

P.I.P.-CLP

The P.I.P.-C.L.P. is designed to detect and prevent overload. The same error detecting circuit that is used to signal the IOC indicator is used to activate this error-driven compressor. It is not a typical signal-driven compressor but a circuit to prevent an overload. It can yield up to 13 dB of additional signal safety margin without noticeable program change.

cya

(cover your amp)

3PLUS3 3+3 Extended Warranty

Crown’s No-Fault,3+3 Extended Warranty pack- age extends the terms of your original full war- ranty for an additional three years, thus covering years four through six. Available for Crown amplifiers only.

Commercial Audio Accessories

RM1 Rack-Mounting Kit

The Crown RM1 is a single-unit rack-mounting kit. It is designed to be used with Commercial Audio models 135MA and 160MA mixer-amplifiers.

RM2 Rack-Mounting Kit

The Crown RM2 is a dual-unit rack-mounting kit. It is designed to be used with Commercial Audio models 135MA and 160MA mixer-amplifiers.

IST Isolation Transformer

The Crown IST is a 600-ohm to 600-ohm isolation transformer used for telephone connectivity. It is designed to be used with Commercial Audio models 135MA and 160MA mixer-amplifiers.

S-COVER Security Cover Bulk Pack

The Crown S-COVERis a 10-pack of security cov- ers. It is designed to be used with Commercial Audio models 135MA and 160MA mixer-amplifiers.

A C C E S S O R I E S