Commercial Audio Series Mixer-Amplifiers

5 Service

Crown amplifiers are quality units that rarely require ser- vicing. Before returning your unit for servicing, please contact Crown Technical Support to verify the need for servicing.

This unit has very sophisticated circuitry which should only be serviced by a fully trained technician. This is one reason why each unit bears the following label:

CAUTION: To prevent electric shock, do not remove covers. No user serviceable parts inside. Refer servicing to a qualified technician.

Complete the Crown Audio Factory Service Information form, in the back of this manual, when returning a Crown product to the factory or authorized service center. The form must be included with your product inside the box or in a packing slip envelope securely attached to the outside of the shipping carton. Do not send this form separately.

5.1 Worldwide Service

Service may be obtained from an authorized service cen- ter. (Contact your local Crown/Amcron representative or our office for a list of authorized service centers.) To obtain service, simply present the bill of sale as proof of purchase along with the defective unit to an authorized service center. They will handle the necessary paperwork and repair.

Remember to transport your unit in the original factory pack.

5.2 US and Canada Service

Service may be obtained in one of two ways: from an authorized service center or from the factory. You may choose either. It is important that you have your copy of the bill of sale as your proof of purchase.

5.2.1Service at a US or Canada Service Center

This method usually saves the most time and effort. Sim- ply present your bill of sale along with the defective unit to an authorized service center to obtain service. They will handle the necessary paperwork and repair. Remem-

ber to transport the unit in the original factory pack. A list of authorized service centers in your area can be obtained from Crown Factory Service, or online from http://www.crownaudio.com/support/servcent.htm.

5.2.2 Factory Service

Crown accepts no responsibility for non-serviceable product that is sent to us for factory repair. It is the owner’s responsibility to ensure that their product is ser- viceable prior to sending it to the factory. Serviceable product list is available at http://crownweb.crownintl.com/crownrma/.

For more information, please contact us direct.

A Service Return Authorization (SRA) is required for product being sent to the factory for repair. An SRA can be completed online at www.crownaudio.com/support/ factserv.htm. If you do not have access to the web, please call Crown’s Customer Service at 574.294.8200 or 800.342.6939 extension 8205 in North America, Puerto Rico and the Virgin Islands only.

For warranty service, we will pay for ground shipping both ways in the United States. Contact Crown Customer Service to obtain prepaid shipping labels prior to send- ing the unit. Or, if you prefer, you may prepay the cost of shipping, and Crown will reimburse you. Send copies of the shipping receipts to Crown to receive reimbursement.

Your repaired unit will be returned via UPS ground. Please contact us if other arrangements are required.

5.2.3Factory Service Shipping Instruc- tions:

1.Service Return Authorization (SRA) is required for product being sent to the factory for service. Please complete the SRA by going to www.crownau- dio.com/support/factserv.htm. If you do not have access to our website, call 1.800.342.6939, exten- sion 8205 and we'll create the SRA for you.

2.See packing instructions that follow.

3.Ship product to:

CROWN AUDIO FACTORY SERVICE 1718 W MISHAWKA RD.

ELKHART, IN 46517

4.Use a bold black marker and write the SRA number on three sides of the box.

5.Record the SRA number for future reference. The SRA number can be used to check the repair status.

5.2.4 Packing Instructions

Important: These instructions must be followed. If they are not followed, Crown Audio, Inc. assumes no respon- sibility for damaged goods and/or accessories that are sent with your unit.

1.Fill out and include the Crown Audio Factory Ser- vice Information sheet in the back of this manual.

2.Do not ship any accessories (manuals, cords, hard- ware, etc.) with your unit. These items are not needed to service your product. We will not be responsible for these items.

3.When shipping your Crown product, it is important that it has adequate protection. We recommend you use the original pack material when returning the product for repair (Figure 9.1). If you do not have the original box, please call Crown at 800.342.6939 or 574.294.8210 and order new pack material. (Do not ship your unit in a wood or metal cabinet.)

4.If you provide your own shipping pack, the mini- mum recommended requirements for materials are as follows:

a. 275 P.S.I. burst test, Double-Wall carton that allows for 2-inch solid Styrofoam on all six sides of unit or 3 inches of plastic bubble wrap on all six sides of unit.

b.Securely seal the package with an adequate car- ton sealing tape.

c.Do not use light boxes or “peanuts”. Damage caused by poor packaging will not be covered under warranty.

Enclose the completed Crown Audio Factory Service Information form (or securely attach it to the outside of carton) and re-seal the shipping pack with a sturdy carton sealing tape.

Cardboard support

Mixer-amp

Bag

Cardboard

support

Figure 9.1 Packing.

Put this assembly in carton.

5.2.5 Estimate Approval

Approval of estimate must be given within 90 days after being notified by Crown Audio Inc. Units still in the pos- session of Crown after 90 days of the estimate will become the property of Crown Audio Inc.

5.2.6 Payment of Non-Warranty Repairs

Payment on out-of-warranty repairs must be received within 90 days of the repair date. Units unclaimed after 90 days become the property of Crown Audio Inc.

If you have any questions, please contact Crown Factory Service.

Crown Factory Service

1718 W. Mishawaka Rd.,

Elkhart, Indiana 46517 U.S.A.

Telephone:

574.294.8200

800.342.6939 (North America,

Puerto Rico, and Virgin Islands only)

Facsimile:

574.294.8301 (Technical Support)

574.294.8124 (Factory Service)

Internet:

http://www.crownaudio.com

page 16

Operation Manual

Page 16
Image 16
Crown Audio 280MA, 180MA operation manual Service

180MA, 280MA specifications

Crown Audio has established itself as a leader in the professional audio industry, and its 280MA and 180MA models epitomize its commitment to high-quality sound reinforcement. These amplifiers are designed for a range of applications, including commercial audio, live sound, and installation, providing unmatched performance and reliability.

The Crown 280MA is a robust two-channel amplifier that delivers an impressive power output of 280 watts per channel at 4 ohms. Its engineering focuses on efficiency and clarity, making it an excellent choice for any scenario where quality audio is essential. One of its standout features is the built-in mixer, which allows users to connect multiple audio sources seamlessly. This mixing capability is especially beneficial in environments such as restaurants, schools, and places of worship, where different audio sources may need to be balanced and controlled easily.

On the other hand, the Crown 180MA offers a more compact design but does not compromise on performance. With a power output of 180 watts per channel at 4 ohms, this model is perfect for smaller venues or setups. Like the 280MA, the 180MA also includes a built-in mixer, ensuring versatile audio management. Both models feature a streamlined user interface, enabling intuitive operation and quick adjustments.

Both amplifiers incorporate advanced technology such as Crown's proprietary DriveCore technology, which enhances power efficiency while reducing distortion. This technology allows the amplifiers to deliver clean, transparent power without the weight typically associated with traditional designs. The lightweight nature of both models makes installation and transport straightforward, adding to their practicality for sound engineers and event organizers.

The overall construction of the 280MA and 180MA is rugged, built to withstand the rigors of professional use. Features such as short-circuit protection, thermal protection, and overload protection ensure long-term reliability, even in demanding environments. Furthermore, the amplifiers offer flexible input options, including line-level and microphone inputs, allowing users to connect various audio sources without hassle.

In conclusion, the Crown 280MA and 180MA amplifiers represent a perfect blend of power, efficiency, and advanced technology. Their built-in mixers, robust protection features, and lightweight designs make them highly versatile for a wide array of applications. Whether used in commercial settings or live sound environments, these amplifiers ensure that the audio experience remains top-notch, reinforcing Crown Audio's reputation as an industry leader.