Crown Audio CE2000TX Options 5.3.1 Alternate Output Connectors, Tamper-ResistantHole Plugs, page

CE2000TX Power Amplifier

5 Advanced Features

and Options

5.3 Options

5.3.1 Alternate Output Connectors

For added system flexibility, Crown offers optional secondary output connectors, with a choice of either model CEAS1 barrier block (see Figure 5.5) or model CEAS2 5-way binding post connectors (see Figure 5.6). Alternate output connectors may come factory installed on new amplifier orders. They can also be added to existing CE 2000TX amplifiers by an authorized Crown Service Center. For more information, please contact Crown Technical Sup- port.

5.3.2 Tamper-Resistant Hole Plugs

Your CE 2000TX amplifier comes with a set of tamper-resistant hole plugs, which allow you to “protect” the level controls against unauthorized adjustment. To use, simply pull off the control knobs from the front of the amp, and slip the hole plugs into place (see Figure 5.7). The plugs should press easily into position with light force. Once in place, the plugs will help to avoid most accidental or intentional tampering (some situations may require additional security measures).

To remove the hole plugs, simply pry the plug away from the amplifier case using a small, flat-blade screwdriver. To help to ensure adequate security, the plugs have been designed to be more difficult to remove than to place into position. If necessary,

additional hole plugs can be purchased separately from Crown’s Parts Department (Part # 103234-1).

Store your knobs in a safe location should you need to make level adjustments in the future.

5.3.3Optional 0.775V Input Sensitivity Setting

The CE 2000TX amplifier also provides an optional 0.775V input sensitivity setting. If you determine your application requires this sensitivity setting, please contact Crown Technical Support for more information.

Figure 5.5 Model CEAS1 Barrier Block Output Connectors

Figure 5.6 Model CEAS2 5-way Binding Post Output Connectors

Figure 5.7 Tamper-Resistant Hole Plugs

Installed in a CE 2000TX Amplifier

Operation Manual page 19