Manuals / Crown Audio / Home Audio / Stereo Amplifier

Crown Audio ce 4000 operation manual Setup, CE 4000 Power Ampliﬁer, page, Unpack Your Ampliﬁer

Models: ce 4000

1 24

Download 24 pages 60.45 Kb

Page 6

3 Setup

CE 4000 Power Ampliﬁer

3 Setup

3.1 Unpack Your Ampliﬁer

YOU WILL NEED (not supplied):

•Two input wiring cables

•Two output wiring cables

•Rack for mounting ampliﬁ er (or a stable surface for stacking)

WARNING: Before you start to set up your ampliﬁer, make sure you read and observe the Important Safety Instruc- tions found at the beginning of this manual.

3.2 Install Your Ampliﬁer

CAUTION: Before you begin, make sure your ampliﬁer is disconnected from the power source, with power switch in the “off” position and all level controls turned completely down (counterclock- wise).

Use a standard 19-inch (48.3 cm) equipment rack. See Figure 3.1 for ampliﬁ er dimensions.

You may also stack amps without using a cabinet.

NOTE: When transporting, ampliﬁ ers should be supported at both front and back.

3.3 Ensure Proper Cooling

When using an equipment rack, mount units directly on top of each other. Close any open spaces in rack with blank panels. DO NOT block front or rear air vents.

Figure 3.2 illustrates standard amplifier air- flow.

Figure 3.2 Airﬂow

Figure 3.1 Dimensions

page 6

Operation Manual

Image 6

Crown Audio ce 4000 operation manual Setup, CE 4000 Power Ampliﬁer, page, Unpack Your Ampliﬁer, Install Your Ampliﬁer

Contents

CE Series Some models may be exported under the name AmcronImportant Safety Instructions CE 4000 Power Ampliﬁerpage DECLARATION OF CONFORMITY pageCE 4000 Power Ampliﬁer Table of Contents CE 4000 Power Ampliﬁerpage CE 4000 Power Ampliﬁer 2 How to Use This Manual1 Welcome 1.1 Features3.2 Install Your Ampliﬁer 3 SetupCE 4000 Power Ampliﬁer Figure 3.2 Airﬂow Figure 3.1 Dimensions3.4 Choose Input Wire 3 SetupCE 4000 Power Ampliﬁer and Connectors3.5Choose Output Wire and Connectors 3 SetupCE 4000 Power Ampliﬁer Figure 3.5 Speakon Output Connector Wiring3.6.2 How to Parallel the Inputs 3 SetupCE 4000 Power Ampliﬁer pageCE 4000 Power Ampliﬁer 4 Operation3 Setup pageC.Power Indicator CE 4000 Power AmpliﬁerA.Power Switch D.Signal IndicatorFigure 4.2 Back Panel Controls and Connectors CE 4000 Power Ampliﬁer4.3Back Panel Controls and Connectors 4 Operation5.1.2 Fault 5 Advanced Features and OptionsCE 4000 Power Ampliﬁer 5.2.2Switching Power Supply with PFCSwitch CE 4000 Power Ampliﬁer5.3 Other Features 5.3.2 Neutrik Speakon WiringCONDITION Normal operation 6 TroubleshootingCONDITION No power to the ampliﬁer CONDITION Distorted soundPerformance Minimum Guaranteed Power watts7 Speciﬁcations CE 4000 Power Ampliﬁer7 Speciﬁcations ConstructionCE 4000 Power Ampliﬁer page574-294-8124 Factory Service 8 ServiceCrown Factory Service 574-294-8301 Technical SupportCE 4000 Power Ampliﬁer 9 WarrantyYEAR SUMMARY OF WARRANTYCE 4000 Power Ampliﬁer 3 YEAR9 Warranty HOW TO OBTAIN WARRANTY SERVICENATURE OF PROBLEM Crown Factory Service InformationCE 4000 Power Ampliﬁer If warranty has expired, payment will beCE 4000 Power Ampliﬁer THIS PAGE INTENTIONALLY LEFT BLANKpage CE 4000 Power Ampliﬁer page