Crown Audio Operation continued, MA-5002VZ Power Amplifier, page, I.Stereo/Mono Switch

MA-5002VZPower Amplifier

4 Operation (continued)

4.3Back Panel Controls and Connectors

I.Stereo/Mono Switch

Allows selection of Stereo, Bridge-Mono, or Parallel-Mono operation.

J.Compressor Switch

Controls the channel's error-driven com- pressor. Selections include Off; Fast (4- millisecond attack, 300-millisecond release); and Slow (12-millisecond attack, 600-millisecond release).

K.Loudspeaker Offset Integration Switch

Allows the Loudspeaker Offset Integration (LOI) circuit to be enabled or disabled. See Section 5.2.4 for more info about LOI.

L.Sensitivity Switch

Three-position switch. Allows the selec- tion of 26 dB; 1.4V; or 0.775V input sensitivity.

M.Power Cord

N.Output Connectors

High-current output block accepts banana plugs, spade lugs or bare wire. A detatch- able output cover, shown in Figure 4.3,

protects against accidental short circuits and dangerous electrical shock.

DANGER: The outputs can produce lethal energy levels! Do not change the output wiring unless the ampli- fier has been off for at least 10 sec- onds.

Note: Some international models include high-current binding posts rather than the output block. Figure 4.4 shows the inter- national binding posts.

Figure 4.2 Back Panel

Controls and Connectors

Operation Manual page 13