Visioneer manual Connect the Power Supply, To connect your Visioneer Patriot 680 scanner

16VISIONEER PATRIOT 680 SCANNER USER’S GUIDE

STEP 3: CONNECT THE POWER SUPPLY

Connect the power supply and power cord, and plug the power supply into an electrical outlet.

To connect your Visioneer Patriot 680 scanner:

1. Plug the power supply into the power port on the scanner.

Note: Only use the power supply (HEG42-240200-7L made by HiTron) included with your scanner. Connecting any other type of power supply may damage your scanner, and will void its warranty.

2. Plug the power cord into the power supply then into a wall outlet.

Now proceed to the next section, “Step 4: Connect the USB Cable and Turn on the Power.”