Crown Audio STUDIO AMPLIFIER owner manual Studio Reference II - Maximum Power Watts, Page, Mains

Studio Reference I & II Professional Studio Amplifiers

Studio Reference II – Maximum Power (Watts)

Mains		(Ohms)	Single Cycle Tone Burst				40 Millisecond Tone Burst
	Stereo/Mono			0.05% Distortion + Noise				0.05% Distortion + Noise
	Mode				(See note 1)				(See note 2)
AC		Load
			50 Hz		1 kHz	7 kHz	50 Hz		1 kHz	7 kHz
	Stereo	4	630		875	820	605		580	585
Hz	(both channels
		8	395		480	455	375		370	375
	driven)
6 0	Bridge-Mono	8	1,345		1,785	1,685	1,245		1,185	1,185
VAC,
	(balanced output)	16	800		970	935	750		755	770
120	Parallel-Mono	2	1,330		1,770	1,670	1,205		1,170	1,170
		4	790		965	920	755		745	765
	Stereo	4	690		905	855	650		610	610
	(both channels
Hz		8	405		495	470	385		385	395
	driven)
50	Bridge-Mono	8	1,395		1,840	1,750	1,315		1,230	1,240
VAC,
	(balanced output)	16	830		1,005	965	785		780	800
100
	Parallel-Mono	2	1,405		1,830	1,730	1,330		1,220	1,220
		4	815		995	955	785		770	790
	Stereo	4	650		880	830	595		565	565
	(both channels
Hz		8	365		450	430	345		340	350
	driven)
50	Bridge-Mono	8	1,305		1,775	1,715	1,195		1,130	1,150
VAC,
	(balanced output)	16	790		965	940	735		735	755
240
	Parallel-Mono	2	1,295		1,765	1,655	1,185		1,120	1,130
		4	785		965	920	750		725	745

Fig. 6.4 Studio Reference II Maximum Power Matrix

Page 32