Crown Boiler KSZ200, KSZ150, KSZ125, KSZ175, KSZ120, KSZ065 Table of Contents, Product Description

Table of Contents

I. Product Description	1
II. Specifications	1
III. Before Installing	2
IV. Locating the Boiler	3
V. Air for Combustion & Ventilation	3
VI. Venting	9
VII. System Piping Connections	11

VIII. Indirect Water Heater & Tankless Coil
Piping	13
IX. Fuel Line Piping	16
X. Wiring	19
XI. Start-up and Checkout	23
XII. Service & Maintenance	26
XIII. Parts	31

I Product Description

The KSZ series boiler is a cast iron oil-fired low pressure steam boiler designed for use in closed heating systems. This boiler must be vented by natural draft into a lined masonry or metal chimney, or Type L vent. An adequate supply of air for combustion, ventilation and dilution of flue gases must be available in the boiler room. This boiler has connections for use with an indirect domestic water heater.

The KSZ series boilers are not designed for use in process or other “open” steam systems.

II	Specifications
FIGURE 1: GENERAL CONFIGURATION
	1
	2