Table of Contents

 

Warnings

2

S e t u p

4

System Component Information

6

Operation

8

Flushing

IO

Parts

12

Technical Data

16

Warranty

16

Grace Phone Number

16

Symbols

Warning Symbol

This symbol alerts you to the possibility of serious injury or death if you do not follow the instructions.

Caution Symbol

A CAUTION

This symbol alerts you to the possibility of damage to or destruction of equipment if you do not follow the instructions.

PRESSURIZED FLUID HAZARD

Spray from the gun, hose leaks, or ruptured components can splash fluid in the eyes or on the skin and cause serious injury.

Do not stop or deflect fluid leaks with your hand, body, glove, or rag.

Follow the Pressure relief procedure on page 8 before cleaning, checking, or servicing the equipment.

Tighten ail fluid connections before each use.

Check the hoses, tubes, and couplings daily. Replace parts immediately if worn, damaged or loose. Permanently coupled hoses cannot be repaired.

Handle and route hoses and tubes carefully. Keep the hoses and tubes away from moving parts and hot surfaces. Do not use the hoses to pull equipment. Do not expose Grace hoses to tem-

peratures above 18Q°Fm (82°C) or below -40°F (-40°C).

FiRE AND EXPLOSION HAZARD

Improper grounding, poor air ventilation, open flames, or sparks can cause a hazardous condition and result in a fire or explosion and serious injury.

Ground the equipment and the object being sprayed. See Grounding the System on page 5.

If there is any static sparking while using the equipment, stop spraying immediately. Identify and correct the problem.

Provide fresh air ventilation to avoid the buildup of flammable vapors from the solvent or the fluid being sprayed.

Do not smoke in the spray area.

Extinguish all open flames or pilot lights in the spray area.

Do not turn on or off any light switch in the spray area.

Electrically disconnect ail equtpment in the spray area.

Keep the spray area free of debris, including soivent, rags, and gasoline.

Do not operate a gasoline engine in the spray area.

.

2 3 0 8 - 4 4 8

Page 3
Image 3
Haier 237410 manual Table of Contents, Symbols