• Back out the stop bolt until the support bracket

 

Drive

rests on the auger pulley. See Figure 14.

 

• Slip the belt between the friction wheel and drive

 

Pulley

 

disc. Remove and replace the belt. Reassemble

 

 

Auger

Drive

following the instructions in reverse order.

 

Pulley

Belt

NOTE: The support bracket must rest on the stop bolt

 

 

Idler

Idler

after the new belt has been assembled.

 

Pulley

Pulley

Replacing Friction Wheel Rubber

 

Auger

 

The rubber on the friction wheel is subject to wear and

 

Belts

 

should be checked after 25 hours of operation, and

 

 

 

 

periodically thereafter. Replace the friction wheel

 

Frame

rubber if any signs of wear or cracking are found.

 

 

 

 

• Drain the gasoline from the snow thrower, or place

 

 

a piece of plastic under the gas cap.

 

 

• Tip the snow thrower up and forward, so that it rests

 

 

on the housing.

 

 

• Remove the six self-tapping screws from the frame

 

 

cover underneath the snow thrower.

 

Frame

• Remove the click pin that secures the left wheel to

 

 

the axle and slide the wheel from the axle.

 

 

• Remove the four screws securing the left drive

Support

 

cover to the frame. Remove the drive cover.

Bracket

 

See Figure 15.

Rear

 

Drive

Auger

Support

Belt

Bracket

Cover

 

Spring

Screw

Front

 

 

 

Auger Belt

Auger Housing

 

Idler Spring

 

 

 

Figure 13

 

Left Axle

Drive Belt

 

Left Drive

• Follow the first four steps of the instructions for

Cover

 

servicing the auger belts.

 

Figure 15

• Pull the idler pulley up and lift the belt off the wheel

 

drive pulley and friction wheel disc. See Figure 13.

• Holding the friction wheel assembly, slide the hex

Friction

 

shaft out of the left side of the frame. The spacer on

Wheel

Drive Plate

the right side of the hex shaft will fall and the

 

sprocket should remain hanging loose in the chain.

 

 

 

 

See Figure 16.

Stop Bolt

 

• Lift the friction wheel assembly out between the

 

axle shaft and the drive shaft assemblies.

 

 

Support Bracket

Auger Pulley

 

 

 

Figure 14

 

 

13

Page 13
Image 13
Cub Cadet 1130 SWE manual Replacing Friction Wheel Rubber, Drive Belt

1130 SWE specifications

The Cub Cadet 1130 SWE is a robust snow blower designed for homeowners who need reliable performance during the winter months. With a focus on power, efficiency, and user comfort, this machine stands out in the crowded market of snow removal equipment.

One of the main features of the Cub Cadet 1130 SWE is its powerful 420cc, 4-cycle OHV engine, which delivers exceptional snow clearing capability. This engine provides the necessary strength to tackle heavy snowfall and ice, making it ideal for areas that experience substantial winter weather. With a clearing width of 30 inches and a throwing distance of up to 40 feet, this snow blower is capable of covering large areas quickly and efficiently.

The Cub Cadet 1130 SWE is designed with a hydrostatic drive system that allows for seamless speed adjustments. This innovative technology enables users to maintain precise control over the speed of the snow blower, ensuring optimal performance on various terrains and snow conditions. Whether dealing with light powder or heavy wet snow, operators can find the perfect pace to get the job done.

Ergonomic design plays a significant role in the usability of the 1130 SWE. The height-adjustable handle with comfort grips ensures that users can operate the machine comfortably for extended periods. Moreover, the machine features an electric start option, making it easy to ignite the engine in cold weather without the hassle of manual starting.

Another notable characteristic of this snow blower is its heavy-duty steel auger and impeller. These components work together to break up and eliminate snow efficiently, contributing to its effectiveness in tough conditions. Additionally, the adjustable skid shoes allow users to control the height of the auger, making it easier to clear snow without damaging surfaces such as driveways and sidewalks.

For enhanced visibility during night-time operations, the Cub Cadet 1130 SWE is equipped with integrated LED headlights. This feature ensures that operators can see their path clearly, reducing the risk of accidents in low-light conditions.

In summary, the Cub Cadet 1130 SWE is a powerful snow blower that combines performance, user-friendly features, and innovative technology. Whether facing heavy snowfalls or light flurries, this snow blower is a reliable partner for homeowners looking to maintain their properties during the winter season.