Cub Cadet 2176 Installation Of Deck, Rod/Bracket Assembly Shoulder Bolt Both Sides, Slide Out

Models: 2176

1 60
Download 60 pages 10.42 Kb
Page 39
Image 39
TRACTOR

TRACTOR

LATCH RECEIVER

(BOTH SIDES)

QUICK ROD/BRACKET ATTACH

ROD

FRONT LIFT

ROD/BRACKET

ASSEMBLY

SHOULDER BOLT

(BOTH SIDES)

Figure 43

SLIDE CAUTION

To avoid possible equipment damage, make sure that the tractor implement lift handle is raised to its highest setting before sliding the deck out from under the tractor.

10.With the tractor implement lift handle raised to its highest setting, slide the deck to the right and out from under the tractor (Refer to Figure 44).

SLIDE

OUT

Figure 44

11. Connect the spark plug wire.

INSTALLATION OF DECK

INSTALLATION OF DECK WARNING

Before performing the mower deck installation, place the PTO switch in the “OFF” position, engage the brake pedal lock, turn the ignition key to the “OFF” position and remove the key from the switch. Disconnect the spark plug wire for additional safety.

Manual background WARNING

When handling the mower deck, be careful not to cut yourself on the sharp blades.

1.Position the tractor and mower deck on a firm, level surface.

Manual background CAUTION

To avoid possible equipment damage, make sure that the tractor implement lift handle is raised to its highest setting before sliding the deck under the tractor.

2.Refer to Figure 45 and position the deck on the right side of the tractor with the front of the deck facing toward the front of the tractor. Raise the tractor implement lift handle to its highest setting and slide the deck under the tractor.

SLIDE

UNDER

Figure 45

39

Page 39
Image 39
Cub Cadet 2176 Installation Of Deck, Tractor Latch Receiver Both Sides Quick Attach Rod Front Lift, Slide Out, Slide Under