TO THE OWNER
Cub Cadet tractor Model 2176 is equipped with a 42- inch mower deck and shipped with a mulching kit. The information in this manual has been prepared in detail to help you better understand the correct operation and maintenance of this equipment. Before you operate the tractor, study this manual carefully. Additional copies may be ordered from your dealer at a nominal price
Your local authorized dealer is interested in the performance you receive from your tractor. The dealer has trained service personnel who are familiar with the latest servicing information, with modern tools and
If you have difficulties with the unit, have any question regarding the operation or maintenance of this equip- ment, or desire additional information not found in this manual, contact your dealer. If you need help locating a dealer in your area, contact the Customer Dealer Re- ferral Line by calling:
To obtain top performance and assure economical operation, the tractor should be inspected by your
authorized dealer periodically or at least once a year, depending on its hours of use.
CAUTION
DO NOT tow your Model 2176 tractor. Towing may damage the transmission. Place the tractor on a LEVEL SURFACE before pulling the trans- mission release lever to the disengaged position.
The Cub Cadet hydrostatic drive system requires min- imal service if the recommended operation and main- tenance procedures are followed.
UNDER NO CIRCUMSTANCES SHOULD YOU AT- TEMPT TO SERVICE THESE UNITS YOURSELF. Only your dealer is authorized, under terms of the war- ranty, to repair or replace drive components of the unit.
When needing parts, always specify the hood model number, factory model number, mfg. date (serial number) and/or the engine spec. and serial numbers (include any prefix and suffix letters). Record these numbers in the space provided on this page.
SERIAL NUMBER LOCATION
NOTE
References to LEFT and RIGHT indicate that side of the tractor when facing forward while seated in the drivers seat. Reference to FRONT indicates the grille end of the tractor; to REAR, the drawbar end.
The chassis model plate, showing the factory model number and Mfg. Date (See Figure 1) can be found on the underside of the seat mounting base. Pivot the seat foward to locate the decal.
XXXXXXXXXXX XXXXXXXXXX
Model Number | Mfg. Date |
CUB CADET CORP.
P.O. BOX 368023
CLEVELAND, OHIO 44136
Figure 1
The engine serial number decal is located on the right side of engine blower housing (Refer to Figure 2).
Figure 2
Hood Model |
|
| Factory Model No. |
|
|
| Mfg. Date |
|
|
| |
|
|
|
|
|
|
|
| ||||
Delivery Date |
|
| Engine Model. No. |
| Engine Serial No. |
|
| ||||
|
|
|
| ||||||||
8
