CARBURETOR ADJUSTMENTS

WARNING

When making adjustments to the carburetor while the engine is running, disengage the PTO clutch and engage the brake pedal lock. Keep clear of all moving parts and be careful of all hot surfaces.

WARNING

Carbon monoxide fumes can be fatal! Do not make any adjustments to the carburetor in a confined area such as a storage building. Move the tractor outside into the air.

The carburetor is adjusted at the factory and under normal operating conditions it will not require readjusting. The high idle is set at the factory and cannot be adjusted. If the engine does not operate properly and the problem appears to be fuel system related, check the following areas before adjusting the carburetor: Refer to MAINTENANCE section.

•Check for fuel in fuel tank

•Check fuel cap vent for blockage

•Check fuel line for pinched or obstructed areas

•Check for fuel filter blockage

•Check for a clogged air filter

If, however, the engine is hard-starting or runs roughly or stalls at low idle speed, it may be necessary to adjust or service the carburetor. Minor carburetor adjustment may also be needed to compensate for differences in fuel, temperature or altitude.

The air filter element and element cover must be assembled to the carburetor when running the engine.

Adjust the carburetor idle fuel mixture in the order stated as follows (Refer to Figure 17):

NOTE

Carburetor adjustments should be made only after the engine has warmed up.

1.Start the engine and run at half throttle for 5 to 10 minutes to warm up. The engine must be warm before making the final settings. Check that the throttle and choke plates can fully open.

2.Idle Speed Setting: Place the throttle control into the “idle” or “slow” position. Set the low idle speed to 1200 rpm (± 75 rpm) by turning the low idle speed adjusting screw in or out. Check the speed using a tachometer (See Figure 17).

NOTE: AIR CLEANER COVER MUST

BE REMOVED TO ADJUST

CARBURETOR IDLE SPEED

IDLE SPEED

 

ADJUSTING SCREW

IDLE FUEL ADJUSTING

AND SPRING

NEEDLE AND SPRING

Figure 17

NOTE

The recommended low idle speed for the en- gine is 1200 rpm. To ensure best results when setting the low idle fuel needle, the low idle speed must not exceed 1200 rpm (± 75 rpm).

CAUTION

The tip of the low idle fuel adjusting needle is tapered to critical dimensions. Damage to the needle and the seat in the carburetor body will result if the needle is forced.

3.Low Idle Fuel Needle Setting: Place the throttle into the “idle” or “slow” position. Turn the low idle fuel adjusting needle in slowly until the engine speed decreases, and then back out approximately 3/4 turn to obtain the best low speed performance.

4.Recheck the idle speed using a tachometer. Readjust the speed as necessary.

22

Page 21 Page 23
Page 22
Image 22
Cub Cadet 2206 manual Carburetor Adjustments
Page 21 Page 23

2206 specifications

The Cub Cadet 2206 is a versatile and robust lawn tractor designed for residential lawn care enthusiasts. It represents the perfect blend of power, precision, and convenience, making it an essential tool for maintaining a pristine landscape.

At the heart of the Cub Cadet 2206 is a reliable Kohler 20 HP engine. This powerful engine provides ample torque and acceleration, enabling users to tackle even the toughest mowing tasks with ease. The engine is built with durability in mind, ensuring long-lasting performance and reduced maintenance concerns.

One of the standout features of this lawn tractor is its 46-inch cutting deck, which allows users to cover large areas quickly while achieving a clean, manicured look. The cutting height is adjustable, providing the flexibility to customize grass length according to personal preferences or lawn care requirements. The deck is designed with a robust structure, ensuring it can withstand regular use while providing consistent results.

The Cub Cadet 2206 employs the innovative Automatic Transmission system that allows for smooth and effortless operation. This user-friendly system provides forward and reverse speeds without the need for manual shifting, making it ideal for navigating around obstacles and maneuvering in tight spaces. The ergonomic steering wheel and comfortable seat enhance the overall driving experience, reducing fatigue during extended mowing sessions.

When it comes to versatility, the Cub Cadet 2206 excels with its optional attachments. Gardeners can equip the tractor with various accessories such as baggers for grass clippings, snow blades for winter snow removal, and spreaders for fertilizing, making it an all-season asset. This adaptability ensures that homeowners can rely on their Cub Cadet throughout the year.

The machine also features a sturdy frame and high-traction tires, ensuring stability and grip on various terrains. This reliability is critical for maintaining control and safety while operating the tractor on sloped or uneven ground.

Additionally, the Cub Cadet 2206 is designed with user-friendly maintenance features. The easy-access oil filter and spacious engine compartment make routine upkeep significantly more manageable, contributing to the tractor's longevity and performance.

In summary, the Cub Cadet 2206 is an exceptional lawn tractor that combines power, comfort, and versatility. Whether you're mowing a small yard or a larger landscape, this machine's advanced features and user-centric design make lawn care a straightforward and enjoyable task. With proper maintenance and care, the Cub Cadet 2206 can be a reliable partner in keeping your outdoor space looking its best for years to come.
Top Page Image Contents