Cub Cadet 6284 Transmission Hi/Lo Range Shift Lever, Cup Holder, Hand Holds, Amber Hazard Lights

Models: 6284

1 52
Download 52 pages 26.94 Kb
Page 14
Image 14

E. Transmission Hi/Lo Range Shift Lever

The Hi/Lo range shift lever is located on the right fender. The lever has two speed range settings and a neutral position. The lever must be shifted into either the high or low range prior to depressing the forward/reverse pedal to drive the tractor.

Push the lever to the right side of the slot to clear the shift gate, then shift the lever as follows:

Push the lever fully forward to shift into the high range.

Push the lever fully rearward to shift into the low range.

Move the lever to the center position to shift into the neutral position.

WARNING: Never attempt to shift the range lever when the tractor is in motion.

F.Cup Holder

The cup holder is located on the right fender.

G. Hand Holds

Hand holds are built into both the left and right hand fender covers. The handles can be used to assist in mounting and dismounting the tractor.

H. Amber Hazard Lights

The hazard lights are located on each side of the ROPS bar. The lights illuminate in a flashing mode when the hazard light switch is turned on. Always use the hazard lights when it is necessary to warn others that the tractor is being operated in the area.

J. Tail Lights

The tail lights illuminate when the ignition switch is in the ON position and the headlight switch is turned on.

K. Storage Tray

The storage tray is located behind the seat. Use the tray to carry small loose articles while operating the tractor.

L. Foldable ROPS (Rollover Protective Structure)

ROPS is installed to prevent or reduce injuries to the operator should the tractor accidentally over- turn. The foldable feature allows the ROPS to be lowered when operating in areas with low over- head clearance. The protection provided by the ROPS is minimized if the seat belt is not used and eliminated when in the folded position.

M. Seat Belt

The seat belt, properly adjusted and used in conjunction with the Rollover Protective Structure (ROPS), can greatly reduce the risk of serious injury or death to the operator if an accidental tractor overturn occurs.

WARNING: DO NOT use the seat belt if the ROPS is in the folded position, or the structure has been removed from the tractor.

N. Auxiliary Hydraulic Control Handle

The auxiliary hydraulic control handle is located on the front of the right hand fender cover. Use this handle to control the movement of attachments connected to the auxiliary hydraulic system of the tractor.

14

Page 14
Image 14
Cub Cadet 6284 Transmission Hi/Lo Range Shift Lever, Cup Holder, Hand Holds, Amber Hazard Lights, Tail Lights, Seat Belt