THROTTLE HANDLE

Mid Throttle

to Engage

Full Throttle to Run

PTO SWITCH

Figure 20

•Push the bottom of the switch downward to disengage the PTO.

IMPORTANT: Normally the PTO will not operate when the tractor is driven in the reverse direction. The PTO reverse override switch must be depressed to operate the PTO while traveling in reverse.

USING THE PTO REVERSE OVERRIDE SWITCH

The PTO reverse override switch, located on the left fender, allows the PTO to operate while the tractor is traveling in the reverse direction. Refer to Figure 19.

•The PTO must first be engaged using the PTO switch on the dash panel.

•Depress the front of the override switch to activate the reverse override system. The light in the override switch will come on.

IMPORTANT: Once activated, the reverse override will remain activated until the ignition switch is turned to the OFF position. If the over- ride switch is illuminated, the system is activated.

The headlights use two halogen bulbs per side. The placement of the bulbs provide a broad light range for safer operation of the tractor in low light conditions.

•To turn on the headlights and taillights, depress the top end of the headlight switch located to the left of the steering wheel.

•To turn off the headlights and taillights, depress the bottom of the light switch.

Use of headlights and taillights is also recom- mended when operating the tractor on or near road- ways to increase visibility to traffic.

Hazard Lights

Always use the flashing amber hazard lights along with the SMV (Slow Moving Vehicle) emblem when operating the tractor on, or near, roadways. Also activate the hazard lights when necessary to warn others that the tractor is being operated in the area.

•To turn on the flashing hazard lights, depress the top end of the hazard light switch located to the left of the headlight switch.

•To turn off the hazard lights, depress the bottom of the light switch.

USING THE TOP LINK RETAINER HOOK

The top link hook is provided to retain the the top link of the three point hitch when not in use.

To utilize the top link hook, proceed as follows:

•While holding the top link upward, raise the hook rod and slide it fully to the left so that it locks in the upright position in the right slot of the mounting bracket.

•Lower the top link into the hook of the rod.

•To release the top link, lift the top link out of the retainer hook; then slide the hook rod fully to the right and pivot it downward.

WARNING: Use extreme caution when operating PTO driven attachments while traveling in the reverse direction. Always look down and behind before and while backing. Do not operate the tractor when children or others are around. Stop the tractor immediately if someone enters the area.

LIGHTING

Headlights and Taillights

TOP LINK

MTG. BRACKET

HOOK ROD

LOCKED IN

BRKT. SLOT

HOOK ROD RELEASED

Always use the headlights and taillights for after dusk and pre-dawn operation of the tractor. The headlights not only illuminate the work area, but also increase the visibility of the tractor for anyone who might enter the area of operation.

Figure 21

21

Page 20 Page 22
Page 21
Image 21
Cub Cadet 6284 manual Using the PTO Reverse Override Switch, Hazard Lights, Using the TOP Link Retainer Hook, Lighting
Page 20 Page 22

6284 specifications

The Cub Cadet 6284 is a robust utility tractor known for its versatility and reliability. Designed for both residential and commercial use, it is ideal for tasks such as landscaping, gardening, and light agricultural work. This model stands out in the compact tractor market due to its powerful engine and innovative features that boost productivity and ease of use.

At the heart of the Cub Cadet 6284 lies a powerful 28-horsepower Kohler diesel engine, which provides ample torque for demanding applications. This engine is designed for efficiency and durability, ensuring long-lasting performance and reduced operating costs. The liquid-cooled design helps to maintain optimal operating temperatures, extended engine life, and consistent power output, making it suitable for various weather conditions.

One of the key characteristics of the 6284 is its hydrostatic transmission, which offers seamless shifting without the need for clutching. This feature allows operators to maintain a steady pace while maneuvering in tight spaces or during intricate tasks. The intuitive controls enhance user experience, making it an excellent choice for both seasoned operators and newcomers alike.

The 6284 features a heavy-duty, rear-mounted three-point hitch with a standard lift capacity which enables the attachment of various implements, enhancing its versatility. With a variety of compatible attachments, including rotary cutters, plows, and loaders, users can easily switch between tasks, making it a multifunctional workhorse.

Another notable technology integrated into the Cub Cadet 6284 is the ergonomic operator station. The layout is designed with user comfort in mind, featuring an adjustable seat, easy-to-reach controls, and excellent visibility, allowing operators to work efficiently for extended periods. The compact design aids in maneuverability, especially in more confined spaces.

Additionally, the Cub Cadet 6284 is built with a sturdy frame and quality materials, designed to withstand heavy use. The all-steel construction contributes to its overall durability, ensuring that the tractor can handle tough jobs without compromising performance.

In summary, the Cub Cadet 6284 is a powerful and efficient compact utility tractor that offers reliable performance for a variety of tasks. Its combination of a robust engine, hydrostatic transmission, and ergonomic design makes it a valuable addition to any toolkit. Whether for residential gardening or more extensive commercial applications, the 6284 is equipped to tackle the job with ease and efficiency.
Top Page Image Contents