Manuals / Brands / Communications / Telephone / GE / Communications / Telephone

GE 800-EFM Step 2: Set DIP Switches to Proper Positions

1 44

Download 44 pages, 1.25 Mb

Installing Your Door Intercom Adapter

Step 2: Set DIP Switches to Proper Positions

15

Set Switches 7-8

Set switch 7 in the down position and

switch 8 in the up position to set this fea-

ture module as a Door Intercom Adapter.

Set Switches 5-6 (Optional)

The setting of these DIP switches deter-

mines how many seconds the magnetic

door strike will remain unlocked when you

unlock it from one of your system phones.

You may choose either 2 seconds, 5 sec-

onds, 10 seconds, or 15 seconds.

Note that you only need to be concerned

with this setting if you plan to connect a

magnetic door strike to this Door Intercom

Adapter.

Set Switches 1-4

The setting of these four DIP switches

determines what station number your

Door Intercom Adapter will be set as.

You may choose to set this Door Intercom

Adapter as either station #23, #24, #25, or

#26.

IMPORTANT: Make

sure that switch 7 is

set in the down posi-

tion and switch 8 is set

in the up position.

Stn 23

Stn 24

Stn 25

Stn 26

15 seconds

10 seconds

5 seconds

2 seconds

800-EFM guide for PDF v1 091102.qxd 9/11/2002 2:40 PM Page 26

Contents

Main IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS Packing List ii Before you begin . . . To order any packing list items, call toll-free 1-800-TMC-1638. Page Table of Contents Reference Drawing v 1A Step 1: Connect Line Cord 1 Connect Line Cord 2 Step 2: Set DIP Switches to Proper Positions Set Switches 7-8 Set Switch 5 Set Switches 1-4 3 Page Step 4: Connect Wiring Block to External Paging Adapter Step 5: Connect Amplifier and Speaker to Wiring Block 1 Install Amplifier and Speaker ( + ) ( - ) 2 Connect Wiring Block to Input of Amplifier Amplifier 1B 10 Operation of your External Paging Adapter 1 2 3 4 1 2 Important Points to Note Page 2A Step 1: Connect Line Cord Step 2: Set DIP Switches to Proper Positions 15 Set Switches 7-8 Set Switches 5-6 (Optional) Set Switches 1-4 Page Step 4: Connect Wiring Block to Door Intercom Adapter Step 5: Connect Door Speaker to Wiring Block Step 6: Connect Doorbell to Wiring Block Step 7: Connect Magnetic Door Strike to Wiring Block (Optional) 1 Install Magnetic Door Strike 2 Connect Magnetic Strike Wires to 12- Volt Supply and to Wiring Block 20 2B 22 Operation of your Door Intercom Adapter 1 2 1 2 3 1 Important Points to Note Page 3A Step 1: Connect Line Cords 1 Connect First Line Cord OR 2 Connect Second Line Cord 26 Page Page Step 4: Connect Music Source 3B Page Providing a Recorded Message to Callers on Hold Adjusting Music Volume Page Page TWO-YEAR LIMITED WARRANTY Warranty Information FCC Information FCC Information (Continued)