GE 800-EFM manual Install Magnetic Door Strike

Installing Your Door Intercom Adapter

Step 7: Connect Magnetic Door Strike to Wiring Block (Optional)

1 Install Magnetic Door Strike

Please follow the installation instructions that came with your magnetic door strike.

Note that TMC Corporation does not manufac- ture magnetic door strikes. The Door Intercom Adapter has been designed and tested to be compatible with industry standard magnetic door strikes, which are also called magnetic door locks. Nutone is one example of a com- pany that supplies magnetic door strikes.

2 Connect Magnetic Strike Wires to 12- Volt Supply and to Wiring Block

Connect one magnetic strike wire to one of the indicated screw terminals on the wiring block. Note that these are the terminals with the yel- low wire and the green wire.

Connect the other magnetic strike wire to one terminal of a 12-volt DC power supply, which you must provide.

Last, connect a wire from the other terminal of the 12-volt power supply to the other indicated screw terminal on the wiring block.

PLEASE NOTE THAT YOU MUST CONNECT A 12-VOLT POWER SUPPLY IN ORDER FOR YOUR MAGNETIC DOOR STRIKE TO FUNC- TION. Please consult the instructions that came with your magnetic door strike for exact power specifications and amperage require- ments.

12-volt DC power supply

20