Installing Your Door Intercom Adapter
Step 6: Connect Doorbell to Wiring Block
1 Install Doorbell
Please follow the installation instructions that came with your door speaker.
Note that the Door Intercom Adpater supports Nutone’s lighted pushbutton. If your pushbut- ton is not lighted, you may purchase a lighted version from Nutone.
2 Connect Doorbell Wires to Wiring Block
Connect the two doorbell wires to the indicated screw terminals on the wiring block. Note that these are the terminals with the orange wire and the blue wire.
Connect one | Connect the other |
doorbell wire to | doorbell wire to this |
this terminal | terminal |
19
