grounded, but a three-hole receptacle is not available, one should be installed by a licensed electrician before using the electric starter.

•If you have a grounded three-prong receptacle, proceed as follows.

•Rotate choke knob to OFF position.

•Connect power cord to switch box on engine. Plug the other end of power cord into a three-prong 120- volt, grounded, AC receptacle.

•Push starter button to crank engine. As you crank the engine, rotate the choke knob to FULL choke position.

•When engine starts, release starter button, and gradually rotate the choke to OFF. If the engine falters, rotate the choke immediately to FULL and then gradually to OFF.

•When disconnecting the power cord, always unplug it from the three-prong receptacle before unplugging it from the snow thrower.

Recoil Starter

•If the engine is cold, rotate the choke knob to the FULL choke position.

•If the engine is warm, place choke in OFF position instead of FULL.

•Depress the primer three times for a cold engine start.

•If the engine is warm, depress the primer only once.

NOTE: Always cover the vent hole in the primer button when pushing. Additional priming may be necessary for first start if temperature is below 15° Fahrenheit.

•Grasp starter handle and pull rope out slowly, until it pulls slightly harder, then let rope rewind recoil.

•Pull thestarter handle swiftly. Do not allow handle to snap back. Allow it to recoil slowly while keeping a firm hold on the starter handle.

•As engine warms up and begins to operate evenly, rotate the choke knob slowly to OFF position. If engine falters, return it to FULL choke, then slowly rotate it to the OFF position.

To Stop Engine

•Run engine for a few minutes before stopping to help dry off any moisture on the engine.

•Move the throttle control to the STOP or OFF position.

•To help prevent possible freeze-up of starter, proceed as follows.

Electric Starter

•Connect power cord to switch box on engine, then to 120 volt AC receptacle. With the engine running, push starter button and spin the starter for several seconds. The unusual sound made by spinning the starter will not harm engine or starter. Disconnect

the power cord from receptacle first, and then from snow thrower’s switch box.

9

Page 8 Page 10
Page 9
Image 9
Cub Cadet 724WE manual To Stop Engine, Recoil Starter
Page 8 Page 10

724WE specifications

The Cub Cadet 724WE stands out as a premium snow blower, designed to handle heavy snowfall with ease. Equipped with a powerful 243cc OHV engine, this machine delivers efficient performance, ensuring that even the most stubborn snow can be cleared away effectively. The engine provides consistent power and reliability, making it an ideal choice for homeowners who face harsh winter conditions.

One of the key features of the Cub Cadet 724WE is its innovative, track-driven design. This unique system offers enhanced stability and maneuverability, allowing users to navigate through deep snow and over uneven surfaces without losing control. The tracked design helps maintain traction, making it easier to push through heavy accumulations of snow.

The 724WE also boasts a wide 24-inch clearing width and a high 21-inch intake height, allowing it to tackle large areas in less time. This means fewer passes and more time saved during snow removal operations. Additionally, the machine is equipped with a steel auger that ensures effective snow collection and a strong impeller for efficient discharge.

Another notable feature of the Cub Cadet 724WE is its adjustable chute. The 2-way joystick control allows for easy direction adjustments, letting users throw snow up to 40 feet away, while also providing the flexibility to control the angle of the chute. This ensures that snow can be directed precisely where needed, preventing it from piling up in unwanted areas.

For added convenience, the 724WE includes LED headlights that enhance visibility during nighttime and early morning snow-clearing tasks. This feature allows users to work safely in low-light conditions.

User comfort is also a priority with the Cub Cadet 724WE. The machine features ergonomic hand grips and a padded handle, reducing user fatigue during operation. The electric start capability simplifies the startup process, enabling users to start their snow blower with the push of a button, even in frigid temperatures.

In summary, the Cub Cadet 724WE is a robust snow blower equipped with advanced features and technologies that make winter clearing tasks more manageable and efficient. Its power, track-driven stability, and user-friendly design make it a worthy investment for anyone looking to conquer winter's worst. With its high performance and innovative features, the 724WE ensures that your driveway and walkways stay clear all season long.
Top Page Image Contents