ADJUSTINGAND OPERATING
MAIN DRIVE BELTS
1 | -Main drive belt | 7 | -Transmission | drive | idler |
2 | -Safety starting switch | 8 -Transmission | brake rod assembly |
3 -Mower clutch control | 9 | -Drive chain | | |
4 -Oil drain hole | 10 -Crankshaft -mower | drive pulley |
5 -Mower drive belt idler | 11 | -Transmission | drive | pulley |
6 -Clutch-brake pedal return spring | | | | |
Underside of riding mower with mower removed to show mower drive belt,
pulleys, rear axle drive chain, etc.
NOTE II A II -Period ically check the transm ission
brake rod spring. If the spring length exceeds 1-1/2-inches with the brake pedal in the locked position readjust the locknut and jam nut on the
end of the rod to obtain the proper adjustment of 1-1/2-inches. Tighten the nuts relative to each other until firmly locked together to insure that they will not loosen up.
