Recalling the memorized channel levels

Memorizing the adjusted channel levels

You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the memorized whenever you want.

1

After performing the steps

~ in "Adjusting the current channel level" procedure on page

50, press the CURSOR UP(

)/DOWN( ) buttons to select the MODE(memory mode), then

press the ENTER button.

 

• The "REF 1" indication flickers.

Press the CURSOR LEFT( )/RIGHT( ) buttons to select the desired preset memory,

2 then press the ENTER button.

• Each time the CURSOR LEFT( ) or RIGHT( ) button is pressed, "REF 1" or "REF 2" is selected.

• The adjusted channel levels have now been memorized into the selected memory.

Recalling the memorized channel levels

Press the CURSOR UP( )/DOWN( ) buttons to select the MODE(memory mode).

1

• "CALIBRATE" may be displayed instead of "REF 1" or "REF 2".

Press the CURSOR LEFT( )/ RIGHT( ) buttons to select the desired one of REF 1 and

2 REF 2.

• Then the channel levels memorized into the selected preset memory are recalled.

ENGLISH

51

Page 52
Image 52
Sherwood R-771 manual Recalling the memorized channel levels, Memorizing the adjusted channel levels, English