ENGLISH
ROOM 2 SOURCE PLAYBACK
•This function allows enjoying one source in the main room and playing another in a different room at the same time.
•When you connect the
Notes:
•The analog signals from the EXTERNAL INs and the digital signals cannot be output to the different room, meaning no playback in a different room.
•You cannot play the ROOM 2 source in any surround mode.
When using the buttons on the remote control unit.
Press the ROOM 2 button.
1
• R2 ~ is displayed on the front panel for several seconds.
•Each time this button is pressed,
the ROOM 2 mode changes as follows : OFF : To turn off the ROOM 2
function. ("R2" goes off.) ON : To turn it on. ("R2" lights up.)
Note:
•When the ROOM 2 mode is set to OFF, the ROOM 2 input and the ROOM 2 volume cannot be selected.
Select the desired
2 input as a ROOM 2 source.
• Each time this button is pressed, the ROOM 2 input can be selected among TUNER, CD, AUX, TAPE, VIDEO 1 ~ VIDEO 4.
Adjust the ROOM 2 volume.
3
• You can adjust the volume on the power amplifier assigned to ROOM 2 when the SURROUND BACK/ ROOM 2 speaker terminals are connected to the speakers in a different room. (For details, refer to "When selecting the AMP ASSIGN" on page 37.)
Start play on the component related to the
4 ROOM 2 source.
When using the buttons on the front panel.
Press the ROOM 2 button to enter the
1 ROOM 2 mode.
•R2 ~ is displayed on the front panel for several seconds.
•When the ROOM 2 setting mode disappears, press the ROOM 2 button again.
2 | Select the desired mode while displaying |
the ROOM 2 setting mode. |
CONTROL
•Each time these buttons are pressed, the mode changes as follows :
R2 ~ (ROOM 2 mode) : To turn on or
off the ROOM 2 function.
Input display (ROOM 2 input) : To select the desired 
ROOM 2 source.
R2 V ~ (ROOM 2 volume) : To adjust the volume on the power amplifier assigned to ROOM 2.
Note:: When the ROOM 2 mode is set to OFF, the ROOM 2 input and the ROOM 2 volume cannot be selected.
Set the selected mode as desired.
3
When selecting the ROOM 2 mode.
OFF : To turn off the ROOM 2
function. ("R2" goes off.)
ON : To turn it on. ("R2" lights up.)
When selecting the ROOM 2 input.
•You can select the desired among TUNER, CD, AUX, TAPE, VIDEO 1 ~ VIDEO 4 as a ROOM 2 source. When selecting the ROOM 2 volume.
•You can adjust the volume on the power amplifier assigned to ROOM 2 when the SURROUND BACK/ ROOM 2 speaker terminals are connected to the speakers in a different room. (For details, refer to "When selecting the AMP ASSIGN" on page 37.)
4 | Start play on the component related to the |
ROOM 2 source. |
Notes :
•Even when this receiver enters the standby mode, in such a case that "R2" lights up still and the POWER ON/STANDBY button lights up in blue as it does in the operating mode, meaning only the ROOM 2 circuitry operates, the ROOM 2 source can be played independently.
•When the ROOM 2 function is operating in the standby mode, only the remote control unit is available.
•When you do not use the ROOM 2 function, turn off the ROOM 2 function to save electricity.
34
