Continued
When selecting the VIDEO MODE
•You can select the video input signal to be output from the MONITOR OUTs.
AUTO : When there are mutiple video input signals, the video input signals are detected and the video input signal to be output from the MONITOR OUTs is selected automatically in the following order : component video,
COMPOSITE : The signal that is input into the (COMPOSITE) VIDEO jack is always played. The composite video input
signal is
output from the (COMPOSITE) VIDEO and COMPONENT MONITOR OUT jacks. COMPONENT : The signals that are input into the COMPONENT jacks are always played.
Because video conversion is not performed, no video signals are output from the MONITOR OUT jacks when there are no video signals that are input into the COMPONENT jacks.
• For details, refer to "Relationship between the video input signal and the video output signal" on page 7.
When selecting the AUTO SURROUND
• Depending on how to select a surround mode, you can select the auto surround mode or the manual surround mode.
ON
(Auto surround mode)
OFF
(Manual surround mode)
Notes :
•When the SPEAKER button is set to off, the auto surround mode is invalid.
•Even when the auto surround mode is selected and the same type of digital signal format is being input, the optimum surround mode may vary depending on whether the speaker type is set to "NONE" or not.
•When the auto surround mode is selected and the PCM (2 channel) digital signal or the analog stereo signal is being input, only the stereo mode will be selected.
•When the auto surround mode is selected, the surround modes other than the optimum surround mode cannot be selected.
When selecting the REMASTER
•The remastering processes the input digital signal and converts its digital sampling frequency to twice the current frequency (88.2/96 kHz) for a more detailed sound reproduction.
ON : To process the input digital signal and to convert its sampling frequency to 88.2/96 kHz for a more
detailed sound reproduction.
OFF : To turn off the remastering function. Notes :
•The remastering function have no effect on the input digital signal from the 88.2/96 kHz source or higher as well as the digital signal that is output from the OPTICAL DIGITAL OUT of this receiver.
•When playing an analog input source, the remastering function cannot be activated.
When selecting the AV SYNC
•There may be a slight time delay between the video and audio signals in case that some video playback equipments may process the video signals later than the audio signals due to signal processing procedure, etc.. Should this happen, you can adjust the time delay of audio signals to synchronize the sound with the picture.
•The time delay can be adjusted within the range of 0 ~ 200 msec.
When selecting the DC TRIGGER
•To turn on the component connected to the DC TRIGGER OUT jack when this input source is selected, you should set the DC TRIGGER to ON for this input source.
OFF : To turn off the DC trigger function.
ON: To turn it on.
•For details, refer to "CONNECTING DC TRIGGER OUT" on page 11.
ENGLISH
41
