5
6
7
8
Fitting the Bar & Chain (continued)
•Pay attention to the direction of rotation of the chain (Fig. 6).
•Fit the chain cover and the relative nuts without tightening them.
•Tension the chain by means of the tensioning screw (L, Fig. 5).
•Hold the tip of the guide bar up and tighten the chain cover nuts securely (Fig. 7). The chain should be taut but turn freely by hand (Fig. 8). Wear gloves while accomplishing this task.
•The chain is tensioned correctly when it can be pulled upwards a few millimeters (Fig. 8).
9
